Im replacing the radiator resivoir and windshield washer resivoir that cme with the Greddy TT kit. Both are real clumsy and bulky and I want to clean up the engine compartment.

The radiator can Im going to use is: http://store.summitracing.com/partde...2D931B&FROM=MG , with http://store.summitracing.com/partde...2D651B&FROM=MG as a mounting bracket.

My question after searching is there a similar container with a fluid level out there. I have found some that with a level but no fill port. The closest thing I have is http://store.summitracing.com/partde...DG1505&FROM=MG but has no level, and needs some modifacation to work. Acouple of plugs and a rubber cap. But the big factor is its plastic and looks hokey.

So any info?

EDIT: Just came accross these: http://store.summitracing.com/partde...5&autoview=sku needs a T fitting at the bottom but the fill is REAL samll. It might be an option though. Also http://store.summitracing.com/partde...5&autoview=sku it has the ports for the level the feed out the bottom, not sure if the top is open though. DAMN EXPENSIVE TOO!