well , send some feed back i have stock 350z ,and my clutch is act up
plan to buy either a jim wolfe flyweel or findinza flywheel but don't know about which clutch to buy........
which clutch do you have and how do you like it?
some of the clutches out there are exedy,act,F1 RACING STAGE 1,spec.
and the ect..i went to a shop and they told me about this clutch and said 400 shipped ,curiuos about the F1 RACING STAGE 1 has anyone heard about this clutch.

 

if u want to go f1 ...i have the clutchmasters stage 4 clutch lightweight flywheel combo... almost stock feel and can hold almost 500 ftlbs of tq..and no "cement mixer" sounds here...lol

 

I have UR's lightweight flywheel and clutch...the flywheel is great and provided decent gains. I have their 6 puck, kevlar, hub spring clutch...it grabs really well, but it chatters a bit at low revs and takes a bit of time to get used to.

 

Go with the Stage 5 Spec clutch like me....

You'll think the cement mixer is music to your ears when you hear it engage. Its like metal on metal squealing. The clutch hold about 900ft/lb of engine torque. Its single disc clutch heaven and hell all in one.

 

some searches will yield alot of good results

the two most popular, which have been proven time and time again, and ACT and JWT - really no need to deviate from either of those

 

yeah idone some search for the clutch and flywheel ,just want to hear waht people have to say about them since they already have them
jim wolfe seems like the common swap plus fidenza and act

 

I have the RPS 6 puck street clutch w/ the Cyn R G flywheel. A little bit of chattering when cold but seems to handle the power fine. Pedal feel isn't too stiff.

I'd like to hear if anyone has a carbon clutch and how they like it because that's what I would get if I already didn't haven't this set up.

 

What are the price ranges on new Clutches.

 

Have a look in the vendor's section.

 

clutch/flywheel combos are a grand and up usually....ohhh wait....SEARCH!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!