Weird throttle Delay at 1500 rpm
I have an 07 Silverstone Base 6mt and for some reason after I serviced my throttle bodies, I noticed that my Z would lunge noticeably harder whenever I let go of the throttle, and push much harder after barely pressing it. For a week I didn't think much of it, but when I was revving to see what the reaction would be when it is in neutral, I noticed that when I rev past 1500, it will go back down normally, hit and stay at 1500 for a full second, then climb back down to 800. This happens when revving anywhere from 1600-5000rpms. Any ideas on this would be greatly appreciated.
PS -- The car is completely stock with about 44,000 miles, and no known problems in the past accept that it is probably due for a timing belt and air filter in the near future.
Thanks.
PS -- The car is completely stock with about 44,000 miles, and no known problems in the past accept that it is probably due for a timing belt and air filter in the near future.
Thanks.
Last edited by SDbackstock; Oct 17, 2009 at 02:32 PM.
Registered User
iTrader: (7)
Joined: Jul 2007
Posts: 976
Likes: 1
From: CaliFTMFGDW OMFG LMFAO LOL WUT
welcome to the forum. I have '07 base as well, mine will do that not all the time, but once in a while too. nothing to worry about...
VQ35s have timing chains, not belts.
VQ35s have timing chains, not belts.
Wow I'm a noob, I totally forgot it is a chain. Thanks for the correction. Are you sure it is normal? Because it has only just now been more noticable for both me and the passenger.
Thanks for the welcome as well.
Thanks for the welcome as well.
Last edited by SDbackstock; Oct 18, 2009 at 01:07 AM.
After servicing the TB did you get the SES (service engine soon) light coming on ? also did you try the Idle Air Volume Learning ? If not you can give it a try.. Link is below
http://www.nissanforums.com/l31-2002...0507-code.html
http://www.nissanforums.com/l31-2002...0507-code.html
Thread
Thread Starter
Forum
Replies
Last Post
Colombo
Forced Induction
35
Nov 9, 2020 10:27 AM
Justin100
Intake Exhaust
26
Nov 29, 2015 03:58 PM




