Notices
Engine & Drivetrain VQ Power and Delivery

cranks but no start. please help

Thread Tools
 
Search this Thread
 
Old Feb 25, 2011 | 09:11 PM
  #1  
jonsbond's Avatar
jonsbond
Thread Starter
Registered User
 
Joined: Oct 2009
Posts: 6
Likes: 0
From: california
Default cranks but no start. please help

hey fellow Z's i bought this car about a year now and every once a while it would just crank but doesn't start. before it happen like once a week and now about 3 times a week. when this happens i would try to take the key out turn it the other way and restart it, sometimes work, sometimes don't and after i get it started it would run perfect... Today the same thing happened and i tried for about 10 minutes but no hope, clueless to what it is.... so waited about 15 min came back out and it started with one try...... anyone have the same problem or have an idea please tell me.. thank you
Reply
Old Feb 25, 2011 | 09:21 PM
  #2  
JasonZ-YA's Avatar
JasonZ-YA
350Z-holic
Premier Member
20 Year Member
iTrader: (60)
 
Joined: Jan 2006
Posts: 11,204
Likes: 32
From: San Antonio/I miss DFW, TX
Default

Prior to turning the key all the way do you hear the fuel pump??

-J
Reply
Old Feb 25, 2011 | 09:29 PM
  #3  
jonsbond's Avatar
jonsbond
Thread Starter
Registered User
 
Joined: Oct 2009
Posts: 6
Likes: 0
From: california
Default

yes i do, because before i would usually listen for it, i would turn the ignition on 1st then i would start it, but now i hear it but no start
Reply
Old Feb 25, 2011 | 10:05 PM
  #4  
bbs350z's Avatar
bbs350z
Registered User
iTrader: (85)
 
Joined: Sep 2006
Posts: 6,662
Likes: 2
From: Scottsdale AZ
Default

Check the easy things first, battery, starter. Try and jump it, see how it starts from there.
Reply
Old Feb 25, 2011 | 10:15 PM
  #5  
jonsbond's Avatar
jonsbond
Thread Starter
Registered User
 
Joined: Oct 2009
Posts: 6
Likes: 0
From: california
Default

thanks a lot guys but i have a feeling it might be my key. looks like a piece of plastic broke off and then previous owner glued it together. now i have to buy another key because it only came with one key when i bought the car. anyone knows how to program a new blank key with a transponder? hopefully not the dealer
Reply
Old Feb 26, 2011 | 06:41 AM
  #6  
AJCaron12's Avatar
AJCaron12
Registered User
 
Joined: Jul 2010
Posts: 290
Likes: 0
From: NH
Default

Originally Posted by jonsbond
thanks a lot guys but i have a feeling it might be my key. looks like a piece of plastic broke off and then previous owner glued it together. now i have to buy another key because it only came with one key when i bought the car. anyone knows how to program a new blank key with a transponder? hopefully not the dealer
You do have to have keys programmed at the dealer. But why do you think it's the key if it's been working for a while and now it's not? I don't think keys go bad all of a sudden. Sounds like your starter may have a dead spot in it.
Reply
Old Mar 3, 2011 | 06:01 AM
  #7  
venmichaels's Avatar
venmichaels
Registered User
 
Joined: Jan 2011
Posts: 47
Likes: 0
From: Tx
Default

check the crankshaft position sensor.. same thing happened to me. i replaced it and it works perfectly nowemily roberts
Reply
Old Mar 5, 2011 | 08:01 AM
  #8  
zapatito82's Avatar
zapatito82
Registered User
iTrader: (-1)
 
Joined: Mar 2009
Posts: 20
Likes: 0
From: Los Angeles CA
Default

you know the same thing would happen to my car when it was just a weekend car It would just crank and crank and nothing Ill sit for a few minutes and then try again and it would turn on just fine It spent a couple of days at the dealer and they said it fired right up every time Now its my daily and it hasnt dont that in over a year
Reply
Old Apr 5, 2011 | 04:43 PM
  #9  
flecko28's Avatar
flecko28
Registered User
iTrader: (13)
 
Joined: Sep 2008
Posts: 343
Likes: 0
From: NY
Default

any luck with figuring out the problem? My 08' is doing the same thing - just once in a while but it's driving me nuts...no codes thrown...yet
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
lolwatbro
Maintenance & Repair
9
Oct 9, 2021 04:58 AM
Colombo
Forced Induction
35
Nov 9, 2020 10:27 AM
Dr.Paulyy
Maintenance & Repair
12
Jul 29, 2019 07:45 AM
3vilbunny
Exterior & Interior
24
Jul 18, 2017 05:10 PM




All times are GMT -8. The time now is 11:48 PM.