Weird symptom after new clutch & flywheel (video)
#1
Weird symptom after new clutch & flywheel (video)
Alright so about 2 1/2 weeks ago I had an ACT Street clutch, ACT Streetlite 17lb flywheel, Wilwood Master, and ZSpeed CSC installed on my Z. I left and everything felt normal. No weird noises or anything. A couple days later (250ish miles) I start hearing a very weird vibration/metal/chattery sound. This is not the ordinary lightened flywheel chatter.. I noticed that right after leaving the shop and everyday - but this noise I'm referring to is completely different and separate. It only happens every once in a while.. I feel like it only happens when coming to a stop.. I'll be pushing in the clutch, and as I'm letting it out it's just a very weird/harsh noise and vibration that I can feel through the clutch pedal as well through the shifter.
I tried to catch the best video I could.. and it's still hard to hear. Only happens when I'm not prepared to take a video -__-
Car is a 2008 with 63k miles on it. Never had any problems with transmission or anything.
Please turn your volume up to hear the noise as best as possible
I tried to catch the best video I could.. and it's still hard to hear. Only happens when I'm not prepared to take a video -__-
Car is a 2008 with 63k miles on it. Never had any problems with transmission or anything.
Please turn your volume up to hear the noise as best as possible
Last edited by Bmurray350z; 10-05-2013 at 06:22 PM.
#2
Found these threads.. looks like they were having the same problem.
http://g35driver.com/forums/engine-d...ll-05-g35.html
http://www.6mt.net/forum/g35-coupe/3...ing-noise.html
Here is a video posted that sounds exactly like the noise I am hearing (Click the image to go to the video)
http://g35driver.com/forums/engine-d...ll-05-g35.html
http://www.6mt.net/forum/g35-coupe/3...ing-noise.html
Here is a video posted that sounds exactly like the noise I am hearing (Click the image to go to the video)
#4
New Member
I heard the noise on the second 'part' of the video, sounds like rubbing at the very end,havent heard that before. Does it drive any differently? break in over?
I would wait until the 500-600 miles is up on break in and see if the noise is still present.
I would wait until the 500-600 miles is up on break in and see if the noise is still present.
Thread
Thread Starter
Forum
Replies
Last Post