wow man take your time. health first.

Damn.....similar thing happened to Eddie of Dynosty, back then Injected Performance, while they had my car four years ago.

Just glad it wasn't your head........

hope recovery goes well

Alright guys, I know you all are wanting some kind of update. Nothing big yet, but we are back working on the gears. Starting to get some use out of my hand after the surgery. Still going to take some time. I don't want you guys thinking this project is a bust. Definitely more to this thing than just drawing it up and cutting the parts.

Sn: Will be working on some billet valve covers as well. That way we can get rid of those plastic covers we have. So that's the two projects I have going for the 350z community.

Jeremiah

Id love a set of billet valve covers, and move the oil fill cap...

+1 on the valve covers

good luck with the hand :thumbup:

Where would you suggest? We were thinking of making the extension removable. Maybe even move it to the passenger side valve cover. Still debating and would be more cost effective.

EZG, thanks man. Go next week to the doc to see the progress.

On topic, the outer gear is drawn, so now all we have to do is draw inner gear. Get the proto made and test, then make necessary changes. Slow process with everything going on, but at least we moving forward and not stagnate.

Yeah passenger side or a lower profile. it would be nice to have provisions for An fittings as well.

Oh okay, actually what we are thinking about doing is making the tube detachable. That way it's high to fill the oil and when done take it off and screw the cap on. That way it works with different intake manifolds. As for the AN provisions, more than likely it will be -10AN, if people want to use small size or stock like plumbing then they can with an adapter. We'd supply the hosing connecting the two covers in the front.

Yep sounds good to me

sounds great

Hey guys,

We are still pushing forward with the billet gears. We finally got the inner gear done. So, next step is to get it over and program the machines to cut one out. I know it's taking a little time to get them done, but we are not giving up. Both the outer and inner gears are both drawn. The one below is the inner. Look forward to having more updates for you guys soon.

Jeremiah

https://cimg0.ibsrv.net/gimg/my350z....53c74e37f0.jpg

who is gonna guinea pig their motor testing these new gears?

We will be testing these before we ever release them to public. Rather make sure with my own motor, than to have someone put up their motor. I have a good team of engineers working on this. Especially with choosing the right material to use for this application.

Can you somehow fix the first post? Images aren't showing up for me.
Awesome thread / write-up though!

Also, whenever the gears are done and ready for production..count me in for this Total_D pump! :)

I tried seeing what's causing the issue. Only thing I can think of is the way they were hosted, the link broke. I'l see if I can find those pictures again. If not, I'll post some more up when we get our gears in for testing.

Sounds good, when I have all the info, this thread will be the first to know. I'm glad we are not too much further from being able to release the gears. Just have to test them now and see they act at high rpms.

To sum it up, we looked at the other offerings, learned from those and looking forward to seeing how well they perform against the other pumps. We will be using a variety procedures to make sure we release nothing but the best. Pretty excited to see this starting to come to fruition.

I'll keep you guys updated.

Jeremiah

If you need help building a sales page/e-commerce site for this, let me know. :)

Finally done: Billet gears and modified oil pumps
 

Well, we finally accomplished what we set out with the oil pumps for the 350z De/Revup. Thanks to those of you who waited this long for an update. The first sets of pumps have already shipped.

Now that these are done, I can move forward, to work on some new ideas.

It's been one heck of a process, but I'm glad we finally made this a reality, with getting these pumps done.

Jeremiah Heidner

wrist
 

Damn J! Haven't talked to you in awhile...dropped the Beemer huh? OUCH! Been there, done that...hurts like hell huh.....know the feeling...well its almost 2 years later now so I guess you are bteer...LOL....

What did you accomplish again? What tests were run?