Notices
Engine & Drivetrain VQ Power and Delivery

Tested a 350z 2005. Low rpm rattel

Old Oct 17, 2017 | 03:13 AM
  #1  
martijnvb19's Avatar
martijnvb19
Thread Starter
Registered User
 
Joined: Oct 2017
Posts: 3
Likes: 0
From: Hengelo
Default Tested a 350z 2005. Low rpm rattel

Hello 350z owners,
I tested a 350z (looking to buy one) and couldnt help but notice an awful Sound accuring when driving.

When driving in any gear at low rpms (1500 ish) you could hear a rasping metal sound from under the car. When driving above 2000rpm in same gear its gone. There is nog grinding going on switching geard and clutch engages high on the pedal.

My question; is the clutch gone bad ? Thrust bearing or resonating exhaust?.. I did not buy the car just yet
hope you Guys can give me some advice or know the issue.

Thanks,
Reply
Old Oct 17, 2017 | 03:18 AM
  #2  
dboyzalter's Avatar
dboyzalter
6 inch cawk is my fave!
iTrader: (3)
 
Joined: Apr 2015
Posts: 6,556
Likes: 973
From: Mass
Default

All saems nroaml, good lcuk.
Reply
Old Oct 17, 2017 | 05:54 AM
  #3  
Atreyu'z 350's Avatar
Atreyu'z 350
New Member
 
Joined: Jan 2017
Posts: 1,936
Likes: 263
From: Pennsylvania
Default

It's probably just a heat shield rattling. I had the same thing happen to mine. Mention it to the seller so that you can get it up in the air to check.
Reply
Old Oct 17, 2017 | 08:18 AM
  #4  
martijnvb19's Avatar
martijnvb19
Thread Starter
Registered User
 
Joined: Oct 2017
Posts: 3
Likes: 0
From: Hengelo
Default

Thanks for the quick response guys. Will have a look under the car soon..
Reply
Old Oct 17, 2017 | 08:27 PM
  #5  
terrasmak's Avatar
terrasmak
Super Moderator
MY350Z.COM
Premier Member
15 Year Member
Liked
Loved
Community Favorite
iTrader: (8)
 
Joined: Jan 2007
Posts: 29,121
Likes: 2,400
From: Sin City
Default

Lightweight flywheel is my bet , even the stock clutch makes some noise
Reply
Old Oct 17, 2017 | 10:53 PM
  #6  
martijnvb19's Avatar
martijnvb19
Thread Starter
Registered User
 
Joined: Oct 2017
Posts: 3
Likes: 0
From: Hengelo
Default

Originally Posted by terrasmak
Lightweight flywheel is my bet , even the stock clutch makes some noise
Sure hope not...Expensive fix ? Can’t do it myself
Reply
Old Oct 18, 2017 | 03:53 AM
  #7  
liven Z life's Avatar
liven Z life
New Member
iTrader: (1)
 
Joined: Nov 2007
Posts: 398
Likes: 25
From: queensbury NY
Default

Originally Posted by martijnvb19
Sure hope not...Expensive fix ? Can’t do it myself
light weight flywheel is not something you would have to fix lol. It means they put a new flywheel in prolly new clutch as well if so. Basically it frees up alil hp that normally woulda been lost by the stock "heavy" flywheel. But they tend to have alil bit of a chatter to them. But stock Z tranny tend to have a similar sound already. It's more of a vey quite fast paced knocking sound on something hollow. Best I can describe. The heat shield would sound more like a aluminum can rattling against metal.
Reply


Thread Tools
Search this Thread

All times are GMT -8. The time now is 06:00 AM.