ecu not connecting with scanner
#1
Registered User
Thread Starter
ecu not connecting with scanner
i have a 2003 350z touring m/t with 113k miles i brought almost 2 year ago and crashed a year and a half ago (nothing major) fixed it up (cost about $600 in part)
then replaced the wheel hub and bearing on RL wheel and both brake system and line on the rear. then back in aug i broke my own key i had (one half was stuck in the ign switch and was still able to start the car) then about a month ago the car started to act funny the key started to stop working and cut power at 5k rpm and nats was enable so i brought a new ign switch with the key (same year and manual) and took my ecu to uprev to get nats disable but after i got the ecu back ign cont & eccs fuse kept popping when i turn the key to the on position (it pop after a second in that position).but doesn't pop when i take the ecu off so i left it alone for 2 week and tow the car back to my hometown so i can have space to work on it but i just found it that the fuse stop popping and now the ecu isn't working, my scan tools isn't getting connection. i am so confused.i know i have short but cant find where it at. please help!!!!
then replaced the wheel hub and bearing on RL wheel and both brake system and line on the rear. then back in aug i broke my own key i had (one half was stuck in the ign switch and was still able to start the car) then about a month ago the car started to act funny the key started to stop working and cut power at 5k rpm and nats was enable so i brought a new ign switch with the key (same year and manual) and took my ecu to uprev to get nats disable but after i got the ecu back ign cont & eccs fuse kept popping when i turn the key to the on position (it pop after a second in that position).but doesn't pop when i take the ecu off so i left it alone for 2 week and tow the car back to my hometown so i can have space to work on it but i just found it that the fuse stop popping and now the ecu isn't working, my scan tools isn't getting connection. i am so confused.i know i have short but cant find where it at. please help!!!!
Thread
Thread Starter
Forum
Replies
Last Post
ycdevil
Engine & Drivetrain
6
04-17-2008 07:19 AM