Notices
Engine & Drivetrain VQ Power and Delivery

Crank, no start. No codes.

Thread Tools
 
Search this Thread
 
Old Nov 3, 2021 | 02:09 PM
  #1  
P8ntballa00's Avatar
P8ntballa00
Thread Starter
New Member
 
Joined: Jul 2020
Posts: 6
Likes: 0
From: Ohio
Default Crank, no start. No codes.

hey guys,

I have a 2004 350z touring.83,000, A/T. I got it from another owner who didn't do any maintenance it seems. Car drove fine for a while. Wife was driving it and said it took her a while to start it. then came home and said the car was sputtering really weird and very hard. when i started it, it cranked for about 10 seconds and had a VERY hard start. still kept doing the chugging thing. now it wont start at all. cranks all day. got a VQ fuel pressure port. put it in today. it'll pressurize to 48 psi. (turning car on but not starting.) drops way low when cranking. around 20-25 psi or so. i replaced a coil, pack that went bad a little bit ago. plugs are new and have about 1500 miles on them. air filter is clear. CKP and CMP sensors have all been previously replaced as well as the oil gallery gaskets done and lots else. i don't feel a lot of it is relevant since this just started. Anyone have any ideas? would be much appreciated.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
AngelaLee416
Maintenance & Repair
14
May 15, 2021 11:20 AM
cairo7
Maintenance & Repair
0
May 25, 2015 08:09 PM
greddyttz
Maintenance & Repair
13
May 7, 2015 06:04 PM
vanittee
Maintenance & Repair
4
Jun 13, 2014 05:09 PM
dsmZ
Maintenance & Repair
1
Jul 6, 2011 11:57 AM




All times are GMT -8. The time now is 10:39 PM.