What Gasket is needed for cat-back install
#1
Registered User
Thread Starter
Join Date: Apr 2003
Location: Montreal, Canada
Posts: 128
Likes: 0
Received 0 Likes
on
0 Posts
What Gasket is needed for cat-back install
Hi Guys, I will be getting my hands on a JIC catback in a few days.
What part number gasket do I need to bolt up the cat-back to the cat?
Thanks
Sev
What part number gasket do I need to bolt up the cat-back to the cat?
Thanks
Sev
#2
Registered User
iTrader: (2)
Join Date: May 2003
Location: Northern Ohio
Posts: 724
Likes: 0
Received 0 Likes
on
0 Posts
Nada...you just use the ones on the car. The JIC should come with any extras that are needed. The stock exhaust gaskets are pretty durable and made of metal. Only if you hear a leak should you replace them. You can if you want, but it is not needed.
#3
Registered User
Thread Starter
Join Date: Apr 2003
Location: Montreal, Canada
Posts: 128
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by peptidbond
Nada...you just use the ones on the car. The JIC should come with any extras that are needed. The stock exhaust gaskets are pretty durable and made of metal. Only if you hear a leak should you replace them. You can if you want, but it is not needed.
Nada...you just use the ones on the car. The JIC should come with any extras that are needed. The stock exhaust gaskets are pretty durable and made of metal. Only if you hear a leak should you replace them. You can if you want, but it is not needed.
From experience. I have always replaced the little donut gasket when I slap on exhausts... But you are saying in this case the old one should still be good?
Thanks
Sev
Last edited by Sevs2k; 03-01-2004 at 03:14 PM.
Thread
Thread Starter
Forum
Replies
Last Post