20350z03

So my engine blew and now I'm seeking a replacement. For some reason 350z engines are more expensive than g35 engines particularly the awd g35. I've done my research and I've come to the conclusion that any non rev up rwd engine will bolt into the z using my old engine mounts and harness, plenum etc. If I happen to get an automatic block I can just remove some part on the crankshaft and the manual trans will slip on no problem. Can anyone verify this information?? Also I had the question about the lower power ratings for the g35 and from research learned that the reason for this is more aggressive tuning on the 350z but the block and head parts are all the same on every non rev up block.

Sorry for my rambling..
Will an awd non rev up g35 engine work on 03 350z?
Are all rwd/awd vq35de internally created equal?
Thanks for for any input.. im trying to get my z back on the road but I dint want to buy the wrong **** trying to get a cheap, low mileage engine with a warranty..

travlee

iTrader: (8)

have you checked into the cost of rebuilding yours?

travlee

iTrader: (8)

if close to houston call IPP

Conway_160

iTrader: (1)

I had an automatic 350z motor in my G35 for about 150 miles until it blew up... not a bad motor a bad f/I tune.

pettyboy69

I'm curious about what you have to change on a g35x engine to make it work in a 350z?