Another Z joining the dark side (LS6 swap)
#21
New Member
Please go with a Tomie cat back just to make purist cry
The following users liked this post:
BluestreamDE (04-07-2018)
#25
I didn't get a Tomie exhaust like 99.95% of builds I went over budget lol and went with a cheap 3" exhaust just so I can fire the car up and won't be to loud (I hope). My buddy who has a shop and builds high end muscle cars gave me **** about that so I told him fine he has to fix it when the car is running and I have done a few events on it
Last edited by Kraize05_Z; 02-28-2018 at 09:29 PM.
The following users liked this post:
HRMoneyPit (03-01-2018)
#29
Well I started to crank the engine to build oil pressure and I was not getting any. Started to do some research and realized I guess I was not being intelligent that day when I was assembling my engine. I forgot to install the front oil galley plug.
So ordered the part installing that today. I made a change to the thermostat housing my coworker saw it and said I don't like how it is at an angle and the coolant hose is touching fan cover. A day later this is what he made. Now the coolant hose shoots straight down so it gives me more room test fitted the part then we hard anodized it.
So ordered the part installing that today. I made a change to the thermostat housing my coworker saw it and said I don't like how it is at an angle and the coolant hose is touching fan cover. A day later this is what he made. Now the coolant hose shoots straight down so it gives me more room test fitted the part then we hard anodized it.
The following 2 users liked this post by Kraize05_Z:
bealljk (04-07-2018),
BluestreamDE (04-07-2018)
#34
350Z-holic
iTrader: (13)
more videos please ... great work!