FS: Fully Built NA VQ35DE!!
01-17-2011, 07:25 AM
#1
Registered User
Thread Starter
iTrader: (9)
Join Date: Oct 2005
Location: Charlotte, NC
Posts: 76
Likes: 0
Received 0 Likes
on
0 Posts
Fully Built NA VQ35DE!!
Hey Guys-
I know you 350z guys can use every part of this motor for your NA builds. You could even use this motor if you configure the mounting points for the tranny and change the outer timing chain cover. Everything else is identical in our motors, heck most of the components in this motor, I bought on this forum.
I fully built a VQ35DE motor for my 2003 Maxima this past year, and to keep it to the point, I've got the bug for a new car and I can't fight the urge anymore. This is the 1st fully built FWD VQ35DE that I know of. I know a few 350z guys have done this and this one is full of top of the line parts and machine work. I spared no expense in building this motor. It has less then 1k miles on it, and is super stout. I'm letting this go for $5500 and with the parts list below you can do your own calculations to see how much I've got in it. Pickup/Shipping is at the buyer's expense. This will be for the complete long block only without external accessories. Please send me an email to Deckdout2@hotmail.com for any questions. This is a great motor to drop in, tune, and go! The motor is in the car, and I will need a Saturday to remove it from the car. Here's the parts list.
This motor has less then 1k miles on it.
Wiseco 11.0:1 CR Pistons (.020 over stock)
Eagle Rods w/ARP Rod Bolts
Brian Crower 264/264 Cams
VQ35HR Valvesprings and Retainers
Double Shimmed Valvespring Seats
5 Angle Serdi Valvejob
Ported and Polished Heads
Heads Decked
New 6th Gen F/R Valve Covers
Fully Blueprint and Balance
Polished and Balanced Crank Independently
Balance as Rotating Assembly to 10k RPMS
OEM Main Crank Bearings
ACL Race Rod Bearings
HR Headbolts
HR Headgaskets
350z Thermostat in Maxima Housing - Extra Shimmed
Link to my build:
http://forums.maxima.org/all-motor/6...5-5gen-na.html
Pics:
I know you 350z guys can use every part of this motor for your NA builds. You could even use this motor if you configure the mounting points for the tranny and change the outer timing chain cover. Everything else is identical in our motors, heck most of the components in this motor, I bought on this forum.
I fully built a VQ35DE motor for my 2003 Maxima this past year, and to keep it to the point, I've got the bug for a new car and I can't fight the urge anymore. This is the 1st fully built FWD VQ35DE that I know of. I know a few 350z guys have done this and this one is full of top of the line parts and machine work. I spared no expense in building this motor. It has less then 1k miles on it, and is super stout. I'm letting this go for $5500 and with the parts list below you can do your own calculations to see how much I've got in it. Pickup/Shipping is at the buyer's expense. This will be for the complete long block only without external accessories. Please send me an email to Deckdout2@hotmail.com for any questions. This is a great motor to drop in, tune, and go! The motor is in the car, and I will need a Saturday to remove it from the car. Here's the parts list.
This motor has less then 1k miles on it.
Wiseco 11.0:1 CR Pistons (.020 over stock)
Eagle Rods w/ARP Rod Bolts
Brian Crower 264/264 Cams
VQ35HR Valvesprings and Retainers
Double Shimmed Valvespring Seats
5 Angle Serdi Valvejob
Ported and Polished Heads
Heads Decked
New 6th Gen F/R Valve Covers
Fully Blueprint and Balance
Polished and Balanced Crank Independently
Balance as Rotating Assembly to 10k RPMS
OEM Main Crank Bearings
ACL Race Rod Bearings
HR Headbolts
HR Headgaskets
350z Thermostat in Maxima Housing - Extra Shimmed
Link to my build:
http://forums.maxima.org/all-motor/6...5-5gen-na.html
Pics:
Last edited by deckdout2; 01-19-2011 at 05:36 AM.
01-22-2011, 01:13 PM
#3
Registered User
Thread Starter
iTrader: (9)
Join Date: Oct 2005
Location: Charlotte, NC
Posts: 76
Likes: 0
Received 0 Likes
on
0 Posts
In case you guys are interested in seeing the potential of what this motor can do. I ran on a Mustang dyno today, and this is an UNTUNED run. No air/fuel corrections and no timing added.
UNTUNED 275whp
UNTUNED 275whp
Thread
Thread Starter
Forum
Replies
Last Post
350Z_Al
Exterior & Interior
133
10-29-2020 07:44 PM
