FS: Sleeved Built Short Block **NEW**
Sleeved Built Short Block **NEW**
SOLD
Here are the specs
Darton sleeved bored and honed
96mm CP pistons 9.5:1 comp. better for e-85 /c16 and not 93 or 91
Carillo Rods "straight - h" w/ upgraded wrist pins
stock crank
billet main girdle (injected performance)
arp mains & rods & L19 head studs (yes I am including them. retails for over $400)
acl race bearings
cosworth oil pump
balanced and line honed
z1 oil pan spacer
pathfinder cooling assembly
all new OEM gaskets and O-rings
Please feel free to ask any questions....
$6500 NEG
This seems to be a fair deal. IPP sells a similar setup for $6K without head studs, oil pan spacer or oil pump or the pathfinder mod and they have a core charge. But they do offer a one year warranty.
Here are the specs
Darton sleeved bored and honed
96mm CP pistons 9.5:1 comp. better for e-85 /c16 and not 93 or 91
Carillo Rods "straight - h" w/ upgraded wrist pins
stock crank
billet main girdle (injected performance)
arp mains & rods & L19 head studs (yes I am including them. retails for over $400)
acl race bearings
cosworth oil pump
balanced and line honed
z1 oil pan spacer
pathfinder cooling assembly
all new OEM gaskets and O-rings
Please feel free to ask any questions....
$6500 NEG
This seems to be a fair deal. IPP sells a similar setup for $6K without head studs, oil pan spacer or oil pump or the pathfinder mod and they have a core charge. But they do offer a one year warranty.
Last edited by silencedeyes; Jan 9, 2014 at 02:12 PM.
Thread
Thread Starter
Forum
Replies
Last Post
Colombo
Forced Induction
35
Nov 9, 2020 10:27 AM
