FS: Entire built turbo ls1 swap at crackhead pricing
Thread Starter
Registered User
iTrader: (85)
Joined: Sep 2006
Posts: 6,662
Likes: 2
From: Scottsdale AZ
full drivetrain partout of my fully built ls1 350z. motor, trans has 0 miles!!!. going a different direction with the car. looking to sell as a package, but will part out if needed. this is over 25k worth of stuff. selling for half that. swap kit is sold. NOT PARTING OUT CAR, JUST MOTOR/DRIVETRAIN
motor built by GCRE in florida, trans built by NRC Racing in indiana
motor-$4400 or $5600 complete (acc, intake man, tb, rails, sensors, etc
built t56 trans $2300 (2002 camaro gearing)
turbo kit $3500
clutch/flywheel $500
wiring harness $250
96lb injectors and AEM drivebox $400
will sell as a package deal for $11,500. THIS IS A STEAL, CRACKHEAD PRICING. WHERE ELSE CAN YOU FIND A COMPLETE BUILT TURBO LS1 SWAP FOR under 12K?????
parts breakdown:
Fully Built LS1** (8.5:1)
Forged LS1 Stock Cube Shortblock
Wiseco -25cc Dished Pistons
Eagle H Beam Rods
Stock Crank (knife edged, balanced, blueprinted)
ARP Main Studs
ARP Head Studs
Ported Melling Oil Pump
Double Roller Timing Chain
Custom grind Cam .643/.632 on 114
*Ported and polished 853 heads
Polished valve covers
Comp Cams Pro Magnum roller rockers
Patriot performance dual springs
Patriot performance locks and retainers
Comp cams lifters
ARP headstuds
GM MLS headgasket
flow 309 at .600 lift
*trans*
cryo treated gears
copper shift rings
Ls2 shifter cup
**Clutch/flywheel**
Spec stage 3+ clutch and aluminum flywheel
*turbo kit*
Custom vband manifolds
Custom vband crossover tube
Turbonetics gtk1000 turbo
Custom oil feed/return/coolant lines
Custom 4” vband downpipe
Tial 44mm wastegate
Custom vband dumptube
Custom 4” single to (2) 3” dual exhaust w/magnaflow mufflers
Custom intake piping
Tial 50mm vband blow off valve
Mishimoto intercooler (4" core)











motor built by GCRE in florida, trans built by NRC Racing in indiana
motor-$4400 or $5600 complete (acc, intake man, tb, rails, sensors, etc
built t56 trans $2300 (2002 camaro gearing)
turbo kit $3500
clutch/flywheel $500
wiring harness $250
96lb injectors and AEM drivebox $400
will sell as a package deal for $11,500. THIS IS A STEAL, CRACKHEAD PRICING. WHERE ELSE CAN YOU FIND A COMPLETE BUILT TURBO LS1 SWAP FOR under 12K?????
parts breakdown:
Fully Built LS1** (8.5:1)
Forged LS1 Stock Cube Shortblock
Wiseco -25cc Dished Pistons
Eagle H Beam Rods
Stock Crank (knife edged, balanced, blueprinted)
ARP Main Studs
ARP Head Studs
Ported Melling Oil Pump
Double Roller Timing Chain
Custom grind Cam .643/.632 on 114
*Ported and polished 853 heads
Polished valve covers
Comp Cams Pro Magnum roller rockers
Patriot performance dual springs
Patriot performance locks and retainers
Comp cams lifters
ARP headstuds
GM MLS headgasket
flow 309 at .600 lift
*trans*
cryo treated gears
copper shift rings
Ls2 shifter cup
**Clutch/flywheel**
Spec stage 3+ clutch and aluminum flywheel
*turbo kit*
Custom vband manifolds
Custom vband crossover tube
Turbonetics gtk1000 turbo
Custom oil feed/return/coolant lines
Custom 4” vband downpipe
Tial 44mm wastegate
Custom vband dumptube
Custom 4” single to (2) 3” dual exhaust w/magnaflow mufflers
Custom intake piping
Tial 50mm vband blow off valve
Mishimoto intercooler (4" core)











Thread Starter
Registered User
iTrader: (85)
Joined: Sep 2006
Posts: 6,662
Likes: 2
From: Scottsdale AZ
turbo kit sold, except turbo. GTK1000 turbo available still. cost me 2300, asking 1500 obo.
everything else still available, motor, trans, cluthch/fw, harness, injectors, etc.
everything else still available, motor, trans, cluthch/fw, harness, injectors, etc.
Trending Topics
Thread Starter
Registered User
iTrader: (85)
Joined: Sep 2006
Posts: 6,662
Likes: 2
From: Scottsdale AZ
414-795-6449
motor is pending sale, should know by the 13th whats going on, but have them shoot me a call
ncpg, im selling the car and would never get what i put into it. i have a spare 2j and z trans lying around so this is going to be a 2j car around 650whp and listed for sale, unles somebody buys my 40k mile shell loaded with bbk, brides, volks etc for 15k lol
i bought a viper and an sl500 so my plates rather full, and gunning for an sl65 next summer so i need space lol
t56/turbokit/harness/ecu sold
motor is pending sale, should know by the 13th whats going on, but have them shoot me a call
ncpg, im selling the car and would never get what i put into it. i have a spare 2j and z trans lying around so this is going to be a 2j car around 650whp and listed for sale, unles somebody buys my 40k mile shell loaded with bbk, brides, volks etc for 15k lol
i bought a viper and an sl500 so my plates rather full, and gunning for an sl65 next summer so i need space lol
t56/turbokit/harness/ecu sold
Last edited by bbs350z; Nov 8, 2014 at 12:25 PM.
Damn I thought I read on FB you were trying to get into a Jimmy Johns franchise down there in AZ. Then all of a sudden I'm reading about you buying a Viper etc., maybe I need a career change hehe. Wish I could have got that T56 from you.
Thread Starter
Registered User
iTrader: (85)
Joined: Sep 2006
Posts: 6,662
Likes: 2
From: Scottsdale AZ
still getting into the franchise lol, cant really move on anything until the z is done and sold, and viper i got for a steal of a price, i couldnt pass it up!
motor still for sale. have updated pics of brand new shiny internals as well
motor still for sale. have updated pics of brand new shiny internals as well







