Sequential Rear LED Turn Signal Retro
11-09-2007 | 01:03 PM
#262
Registered User
Joined: Mar 2006
Posts: 68
Likes: 0
From: Florida
Originally Posted by evobunny
video wont work for me.
If it doesn't work in IE, Try Firefox, or netscape.
11-11-2007 | 10:36 PM
#263
Originally Posted by zigggy56
http://videos.streetfire.net/video/c...5b01780144.htm
If it doesn't work in IE, Try Firefox, or netscape.
If it doesn't work in IE, Try Firefox, or netscape.
By the way, I received the leds for your reverse lights. I'm not using the luxeon 3 watts like I did in my pair. I'm using the new luxeon K2's. They are rated at 1400mA a piece. The old leds were 350mA each. It may only take 1 led per side for the reverse lights. These things are ridiculously bright.
-Acree
11-12-2007 | 03:58 PM
#264
Registered User
Joined: Mar 2006
Posts: 68
Likes: 0
From: Florida
Originally Posted by Acree
Thanks Zig.
By the way, I received the leds for your reverse lights. I'm not using the luxeon 3 watts like I did in my pair. I'm using the new luxeon K2's. They are rated at 1400mA a piece. The old leds were 350mA each. It may only take 1 led per side for the reverse lights. These things are ridiculously bright.
-Acree
By the way, I received the leds for your reverse lights. I'm not using the luxeon 3 watts like I did in my pair. I'm using the new luxeon K2's. They are rated at 1400mA a piece. The old leds were 350mA each. It may only take 1 led per side for the reverse lights. These things are ridiculously bright.
-Acree
However I do have a minor problem with my Z and weak contacts on the front turn signals. Do me a favor and take out one of your front turn signal bulbs, and make sure rappid flash pattern doesn't fry any of your circuit boards on your sequential turn signals. let me know.
11-13-2007 | 10:11 AM
#267
Originally Posted by Silverstone-Z
How much is it for you to do this again?
-Acree
02-02-2008 | 10:55 AM
#275
Originally Posted by minispider
any news on this?
For the new signals, I actually designed my own circuit boards for them. The problem is that all of the new components are surface mount, which means the manufacturers and characteristics of the components have changed. The problem is with a single component. I can't find the correct one. Hopefully I'll get it figured out in the next week and get Ziggy his set. I'm not taking anymore orders or updates until I get him his set, and they work properly. Sorry for the delay, but I won't put something out that doesn't work correctly.
-Acree
02-02-2008 | 11:38 AM
#276
Registered User
Joined: Dec 2006
Posts: 9
Likes: 0
From: Cedar Rapids, IA
Originally Posted by Acree
The whole thing is at 98% completion, but the last 2% currently has me dumbfounded.
For the new signals, I actually designed my own circuit boards for them. The problem is that all of the new components are surface mount, which means the manufacturers and characteristics of the components have changed. The problem is with a single component. I can't find the correct one. Hopefully I'll get it figured out in the next week and get Ziggy his set. I'm not taking anymore orders or updates until I get him his set, and they work properly. Sorry for the delay, but I won't put something out that doesn't work correctly.
-Acree
For the new signals, I actually designed my own circuit boards for them. The problem is that all of the new components are surface mount, which means the manufacturers and characteristics of the components have changed. The problem is with a single component. I can't find the correct one. Hopefully I'll get it figured out in the next week and get Ziggy his set. I'm not taking anymore orders or updates until I get him his set, and they work properly. Sorry for the delay, but I won't put something out that doesn't work correctly.
-Acree
Which component can you not find? I made a similar set for G35's using all surface mount stuff. I can share with you which components I used if you want.
05-01-2008 | 07:47 AM
#279
Originally Posted by Acree
The whole thing is at 98% completion, but the last 2% currently has me dumbfounded.
For the new signals, I actually designed my own circuit boards for them. The problem is that all of the new components are surface mount, which means the manufacturers and characteristics of the components have changed. The problem is with a single component. I can't find the correct one. Hopefully I'll get it figured out in the next week and get Ziggy his set. I'm not taking anymore orders or updates until I get him his set, and they work properly. Sorry for the delay, but I won't put something out that doesn't work correctly.
-Acree
For the new signals, I actually designed my own circuit boards for them. The problem is that all of the new components are surface mount, which means the manufacturers and characteristics of the components have changed. The problem is with a single component. I can't find the correct one. Hopefully I'll get it figured out in the next week and get Ziggy his set. I'm not taking anymore orders or updates until I get him his set, and they work properly. Sorry for the delay, but I won't put something out that doesn't work correctly.
-Acree
Two thumbs up!
05-02-2008 | 08:30 AM
#280
Originally Posted by Chi-TownWarrior
will this work on a 2008?
Originally Posted by minispider
Acree where are you?
Originally Posted by Silverstone-Z
Quality control by a guy that does excellent work.
Two thumbs up!
Two thumbs up!
-Acree