Pics of Bat's Overlays on a Chrome Silver
Originally Posted by Z BOY
how's the visibility at night?
Last edited by FireStormTT; Jan 11, 2006 at 08:48 AM.
Those house are freakin sweet! A house like that in Cali would run in the high $800's or low $1 millions.......
Nice rears by the way.....not feeling the fronts!
Get your windows tinted 20% at the least.
Nice rears by the way.....not feeling the fronts!
Get your windows tinted 20% at the least.
Nice job on the install
There are pics plus a step by step guide on applying my overlays in the sticky above
. If you get airbubbles, simply pop them with a pin and apply heat and pressure. Usually the Overlay will flatten out after sitting out in the sun. As far as the 6/10 tint goes, all about personal preference. I personally like the subtleness of my lighter 3/10 tint, plus there is very little if any affect on light output
.
You guys mind if I add your pics to my Gallery?
guide to applying my overlays: http://www.scionlife.com/forums/viewtopic.php?t=34653
Bat™
There are pics plus a step by step guide on applying my overlays in the sticky above
. If you get airbubbles, simply pop them with a pin and apply heat and pressure. Usually the Overlay will flatten out after sitting out in the sun. As far as the 6/10 tint goes, all about personal preference. I personally like the subtleness of my lighter 3/10 tint, plus there is very little if any affect on light output
. You guys mind if I add your pics to my Gallery?
guide to applying my overlays: http://www.scionlife.com/forums/viewtopic.php?t=34653
Bat™
this is what happend to my head lights.
i installed the overlays maybe about 6 months ago. so today i dicided to tale them off. well i got my blow dryer to heat up the overlay . it came off np. but there was alot of dry glue or what ever u call that stuff hard to come off... actually a pain in the ***, but the main problem that i notice is that all around my head light it has like cracks at least 2 inchs from the out side towards the inside. now i don't know if it's because of the overlay not letting the light out , that maybe heat the lens too much( but i ask my self well some guys even put ther head light in the oven) but one thing is for sure they were not lake that when i installed the over lays.... i know batmobile is a cool guy and everything but i wouln'd do this to my car again.. now that lil trick is gonna cost me 2 new head lights... so my advice to u guyz thats just put them on ... better take them off asap.. before is too late.
i installed the overlays maybe about 6 months ago. so today i dicided to tale them off. well i got my blow dryer to heat up the overlay . it came off np. but there was alot of dry glue or what ever u call that stuff hard to come off... actually a pain in the ***, but the main problem that i notice is that all around my head light it has like cracks at least 2 inchs from the out side towards the inside. now i don't know if it's because of the overlay not letting the light out , that maybe heat the lens too much( but i ask my self well some guys even put ther head light in the oven) but one thing is for sure they were not lake that when i installed the over lays.... i know batmobile is a cool guy and everything but i wouln'd do this to my car again.. now that lil trick is gonna cost me 2 new head lights... so my advice to u guyz thats just put them on ... better take them off asap.. before is too late.
Originally Posted by mono11
this is what happend to my head lights.
i installed the overlays maybe about 6 months ago. so today i dicided to tale them off. well i got my blow dryer to heat up the overlay . it came off np. but there was alot of dry glue or what ever u call that stuff hard to come off... actually a pain in the ***, but the main problem that i notice is that all around my head light it has like cracks at least 2 inchs from the out side towards the inside. now i don't know if it's because of the overlay not letting the light out , that maybe heat the lens too much( but i ask my self well some guys even put ther head light in the oven) but one thing is for sure they were not lake that when i installed the over lays.... i know batmobile is a cool guy and everything but i wouln'd do this to my car again.. now that lil trick is gonna cost me 2 new head lights... so my advice to u guyz thats just put them on ... better take them off asap.. before is too late.
i installed the overlays maybe about 6 months ago. so today i dicided to tale them off. well i got my blow dryer to heat up the overlay . it came off np. but there was alot of dry glue or what ever u call that stuff hard to come off... actually a pain in the ***, but the main problem that i notice is that all around my head light it has like cracks at least 2 inchs from the out side towards the inside. now i don't know if it's because of the overlay not letting the light out , that maybe heat the lens too much( but i ask my self well some guys even put ther head light in the oven) but one thing is for sure they were not lake that when i installed the over lays.... i know batmobile is a cool guy and everything but i wouln'd do this to my car again.. now that lil trick is gonna cost me 2 new head lights... so my advice to u guyz thats just put them on ... better take them off asap.. before is too late.
Originally Posted by mono11
yep. i guess u'll find out when u take urs off .. peace!
I've sold these the last few years with no major issues at all after they were removed. In fact, I sported full smoke on my Headlights for at least a year before deciding to go a different route. I didn't have any marks left on my headlights after removing the Overlays. Not sure why it happened to mono11's. I know it happened to one other person a while back, but we could never really pinpoint where it came from. I've gotten customers in the past years switching over from full smoke overlays to one of my eyelid Overlays, just to change the look. No issues, other than alittle residue which can be easily removed with goo off. Alot of companies sell these nowadays, and it's very rare when you hear of this type of problem. I know a few people have had this issue in the past with their headlights, but they didn't even have any Overlays on them to begin with.
Bat™
Bat™
Last edited by Blue Batmobile; Jan 12, 2006 at 11:32 PM.
i hear u bat. the bas thing is that my warreamty just expierd.. i'm just gonna have to be on the look out for a wreacked z so that mabe i can buy the light. .. mine while i was thinking . mabe getting some blue ones. don't know yet cuz it looks pretty bad right now.
Sorry to hear that. I'm sure you'll be able to find a set soon, since alot of people are converting to 06 headlamps, I'm thinking of doing the same myself
. Good Luck!
Bat™
. Good Luck!Bat™
Thread
Thread Starter
Forum
Replies
Last Post
350Z_Al
Exterior & Interior
133
Oct 29, 2020 07:44 PM
Tonyz_2004_350z
South East Marketplace
1
Oct 4, 2015 12:53 PM



