wowo...smoke tail light and signal light
04-27-2006, 08:39 PM
#21
Registered User
iTrader: (21)
Join Date: Apr 2004
Location: DEATH STAR
Posts: 5,728
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Bubble
one word of advice: When you sand down, use 400 then 1000 then 1500 grid. It takes time. (few hours) Be patient
-B-
04-27-2006, 08:41 PM
#22
Registered User
iTrader: (2)
Join Date: Jun 2005
Location: Orange County CA
Posts: 382
Likes: 0
Received 0 Likes
on
0 Posts
I just got a ticket 1 and a half weeks ago for my overlays....i was going 68 on the 5 north, a cop pulled me over and wrote me a ticket for it...the pr!ck, just be careful bubble, cops have nothing better to do....and it wasnt profiling either, I was wearing my suite and tie coming from work....grrrrrrrr so fr!k!n p!ssed
04-27-2006, 08:42 PM
#23
oh no. DON"T shot base after 400. You still have quite a bit of scratching marks. The OEM has very rough skin. 400 will take off all the rough skin. 1000 to smooth it out. Whatever you see there is what you get. Don't skip.
like this one:
Took me nearly 5 hours to sand them down to a perfect, smooth surface. Using both machine and hand.
like this one:
Took me nearly 5 hours to sand them down to a perfect, smooth surface. Using both machine and hand.
Last edited by Bubble; 04-27-2006 at 08:45 PM.
04-27-2006, 09:32 PM
#24
Registered User
iTrader: (21)
Join Date: Apr 2004
Location: DEATH STAR
Posts: 5,728
Likes: 0
Received 0 Likes
on
0 Posts
two hours, da sander and block, this is 400. smooth as glass, ionon how ur 400 has soo many scratch marks on it..
[
painters usually shoot the base after 400. at least all the painter i know, if you dont give the base something to grab hold of itll sag and run...
[
painters usually shoot the base after 400. at least all the painter i know, if you dont give the base something to grab hold of itll sag and run...
Last edited by B-Unit; 04-27-2006 at 09:35 PM.
04-28-2006, 07:24 AM
#31
Originally Posted by GTNPU Z
Nicely done bro! 
BTW...does Mr. Gia have any big projects at the moment? Wanted to bring my car in to get some stuff done.
BTW...does Mr. Gia have any big projects at the moment? Wanted to bring my car in to get some stuff done.
04-28-2006, 08:24 AM
#34
Registered User
hey Bubble, where did you get the VHT spray?
Also, how does it look when lighted up? I had problems with the spray being uniform when i tried a different brand of spray tint before. Does this one come out perfectly fine?
Also, how does it look when lighted up? I had problems with the spray being uniform when i tried a different brand of spray tint before. Does this one come out perfectly fine?
04-28-2006, 08:32 AM
#35
Originally Posted by aznmojo
hey Bubble, where did you get the VHT spray?
Also, how does it look when lighted up? I had problems with the spray being uniform when i tried a different brand of spray tint before. Does this one come out perfectly fine?
Also, how does it look when lighted up? I had problems with the spray being uniform when i tried a different brand of spray tint before. Does this one come out perfectly fine?
04-28-2006, 10:02 AM
#39
Registered User
iTrader: (21)
Join Date: Apr 2004
Location: DEATH STAR
Posts: 5,728
Likes: 0
Received 0 Likes
on
0 Posts
Hey bubble.
Since you removed the panels ill ask this 1 also, how do u remove the part on the roof that like the pillars, the part that runs from the lines of the hatch to the hood, they are removable i know, do they screw out? or snap?
-B-
Since you removed the panels ill ask this 1 also, how do u remove the part on the roof that like the pillars, the part that runs from the lines of the hatch to the hood, they are removable i know, do they screw out? or snap?
-B-
