Decals for center caps of Nismo LMGT4 wheels?
#1
Decals for center caps of Nismo LMGT4 wheels?
I was thinking of just a small Nismo decal like the ones on the spokes for the center caps; they look kind of plain with nothing on them. Is there anything like this available? I'd also like it to be the newer style Nismo logo, to match the spoke decals...
#2
Guest
Posts: n/a
you could buy two packs of these. they would work
http://cgi.ebay.com/ebaymotors/Nismo...mZ300002007233
or how about the rays centercaps made for the nismo wheels
http://www.japanparts.com/Pic/pic087/132-STDwLogo.JPG
http://cgi.ebay.com/ebaymotors/Nismo...mZ300002007233
or how about the rays centercaps made for the nismo wheels
http://www.japanparts.com/Pic/pic087/132-STDwLogo.JPG
Last edited by **; 07-02-2006 at 10:32 AM.
#6
Originally Posted by mc350z
you could buy two packs of these. they would work
http://cgi.ebay.com/ebaymotors/Nismo...mZ300002007233
or how about the rays centercaps made for the nismo wheels
http://www.japanparts.com/Pic/pic087/132-STDwLogo.JPG
http://cgi.ebay.com/ebaymotors/Nismo...mZ300002007233
or how about the rays centercaps made for the nismo wheels
http://www.japanparts.com/Pic/pic087/132-STDwLogo.JPG
Something like these or these would be ok (not sure which is the right size), except they are the old logo...
I like the Rays caps (don't really dig the gold, though), but that's just way too much money.
I thought about the side emblems, but thought it would be a little too overboard on the number of "Z"s on the exterior of the car...
Any other ideas?
Trending Topics
#9
Guest
Posts: n/a
Originally Posted by MustGoFastR
Hmm, those Ebay ones are on white backgrounds;
yeah . i realized that after i posted. i didnt read that it said white, what you need is the transparent type. i had a little sticker set like that with clear bacgrounds but i used them all on dumb stuff like model cars and i put one on my dash guage cluster.
#11
Registered User
iTrader: (1)
Join Date: Sep 2005
Location: louisiana
Posts: 532
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by BrickydZ
Made these from 4 side emblems on top of the stock cap.
#12
Ok, I'm a dork. I just realized the Nismo rims have the old Nismo logo on them, so the center cap decals on Ebay should work; just need to find some the right size... the ones I linked above are only 4.4 and 5.5cm. Can anyone tell me what the diameter of the center caps are? My wheels don't arrive until the end of the week. The side emblems are 7cm and if they are a perfect fit, then the Ebay ones are too small, as I don't think a round decal would look good unless it was the same size as the center cap...
Last edited by MustGoFastR; 07-04-2006 at 10:21 AM.
#13
Registered User
iTrader: (1)
Join Date: Sep 2005
Location: louisiana
Posts: 532
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by MustGoFastR
Ok, I'm a dork. I just realized the Nismo rims have the old Nismo logo on them, so the center cap decals on Ebay should work; just need to find some the right size... the ones I linked above are only 4.4 and 5.5cm. Can anyone tell me what the diameter of the center caps are? My wheels don't arrive until the end of the week. The side emblems are 7cm and if they are a perfect fit, then the Ebay ones are too small, as I don't think a round decal would look good unless it was the same size as the center cap...
#14
Registered User
iTrader: (2)
My custom Nismo LM GT4 wheels
Originally Posted by MustGoFastR
Ok, I'm a dork. I just realized the Nismo rims have the old Nismo logo on them, so the center cap decals on Ebay should work; just need to find some the right size... the ones I linked above are only 4.4 and 5.5cm. Can anyone tell me what the diameter of the center caps are? My wheels don't arrive until the end of the week. The side emblems are 7cm and if they are a perfect fit, then the Ebay ones are too small, as I don't think a round decal would look good unless it was the same size as the center cap...
Attached is a pic of my wheels and custom centercaps. I machined the OEM centercaps to get a flat surface; they come as a "domed" surface. I then bonded a cut circle of carbon fiber sheet that was bonded to the centercap, followed by a Z emblem from the rear deck lid, courtesy of Courtesy Nissan! Not everyone likes it, but at least my wheels were unique enough for the Japanese Nismo management to award me the Nismo Award at this summer's National ZCCA Car Show!
Last edited by ChinaClipper; 07-07-2006 at 04:32 AM.
#18
Registered User
iTrader: (2)
Originally Posted by ObiRedKenobi
A good sign shop should be able to take most any vector drawing you take them and cut out a vinyl decal to fit the center cap. Just a thought.
#20
Registered User
iTrader: (2)
Originally Posted by ObiRedKenobi
Well true but I was thinking of just cutting out the letters rather than a whole piece to cover the cap.