My Mailorder Bride Came in!
Originally Posted by Royjr
Would first like to comment on the great looking seats!
Now the electrical engineer is about to come out in me. You said you needed 2 ohms of resistance, yet in your picture you had five 10 ohm resistors in series. The way you have them in your picture (in series, end to end) you would have 50 ohms resistance. You need them in parallel (twist all the ends together) to create the 2 ohm resistance you said in the post.
But if it worked, great!
Now the electrical engineer is about to come out in me. You said you needed 2 ohms of resistance, yet in your picture you had five 10 ohm resistors in series. The way you have them in your picture (in series, end to end) you would have 50 ohms resistance. You need them in parallel (twist all the ends together) to create the 2 ohm resistance you said in the post.
But if it worked, great!
^^ Thanks Roger.. you car is one of my favs here too!
I updated the pic to show the correct configuration of the harness (parallel instead of series 
) .. Had to spend another whole $1.98 last night and buy all new resistors because of that screw up haha
--mike
Originally Posted by M3to350z
I am a mechanical engineer and I also was like how many damn resistors are there.
) .. Had to spend another whole $1.98 last night and buy all new resistors because of that screw up haha--mike
Registered User
Joined: May 2004
Posts: 244
Likes: 0
From: New York City/New Jersey
Damn Mike you really know how to finds ways to out do yourself huh? Nice job with the seats man, they look great. You came to mind the other day, and I was saying man one day I need to come up there and pay a visit and you can help me out with the car pc, and since i'm up there i'd might as well visit Nasar and have him do my audio. Hmmm who knows the next Cape Cod meet sounds like a good time hehe. But anyway good job again bro on your latest mod. Now I can't imagine what the next one will be, hehe.
TSZ33
Chris
hehe. But anyway good job again bro on your latest mod. Now I can't imagine what the next one will be, hehe.TSZ33
Chris
Awesome. Love the red leather on red fabric!
Which Brides are those? Are they the same as the Brix II, but with lower thigh bolsters?
And what is the name of those black Brides???? That **** is smokin hot!
Which Brides are those? Are they the same as the Brix II, but with lower thigh bolsters?
And what is the name of those black Brides???? That **** is smokin hot!
Originally Posted by whitebwoy
Awesome. Love the red leather on red fabric!
Which Brides are those? Are they the same as the Brix II, but with lower thigh bolsters?
And what is the name of those black Brides???? That **** is smokin hot!
Which Brides are those? Are they the same as the Brix II, but with lower thigh bolsters?
And what is the name of those black Brides???? That **** is smokin hot!
https://my350z.com/forum/exterior-and-interior/215314-everyone-s-getting-married-these-days-so-i-thought-i-would-too.html
Thanks guys!
yeah they were Katzkin red leather seat covers over the stock seats..They were nice but i needed to kick it up a notch..
The red Brides are XAX II .. and yes, they are basically Bride Brix made for big americans (low side bolsters)
Your gonna laugh but I chose them over the very pimp Stradias because I like the harness holes better ..
call me weird I guess but these look like the classic Bride seats that I've always known and loved
--mike
Originally Posted by mahont
So were those red seat covers over stock seats or what?
The red Brides are XAX II .. and yes, they are basically Bride Brix made for big americans (low side bolsters)
Your gonna laugh but I chose them over the very pimp Stradias because I like the harness holes better ..
call me weird I guess but these look like the classic Bride seats that I've always known and loved --mike
LEEMIK.. good choice! ..... im still so confused 
and 
goin crazy 
thinking of a sick *** seat set up for my Z.. 
Thread
Thread Starter
Forum
Replies
Last Post
tm9293
North East Marketplace
5
Oct 29, 2015 02:58 AM
Just-Cruising
Wheels & Tires
1
Sep 1, 2003 11:30 PM
