Hey does anyone here have or know the instructions to installing a nismo V1 Spoiler Jstu got it in today and planning to put it on this weekend

 

measure twice, drill once...i have a few "missed" spots so be careful!! tracing a template of the bottom with the holes is a good idea, but the best method is to use some drill "T"s. ionno how to explain how they work, but that method prevents mis-drilling. you can go ask your bodyshop if you can borrow some, i dont think they're sold in stores.

 

There really aren't any set installation instructions, AFAIK. If you have to ask, you probably want a body shop to do it for you; it requires drilling holes on your hatch and careful alignment. Did you get an authentic one or a replica? You may also need a hole saw to cut some access holes for a couple of the bolts on the underside of the hatch behind the trim.

Search around; I recall an installation thread with pics that was pretty good...

 

wow, it got there fast. Here is a link of leemik's install... this should help you
https://my350z.com/forum/exterior-and-interior/198373-another-nismo-v1-spoiler-installed.html

 

^ That's the one I was thinking of.

 

yo jay should i use the bolts that came with the spoiler or should i go get new ones at home depot?

 

Use the one on the spoiler is fine.