where do you got these cf center pieces? I want one but only found fake cf vinyl but not real cf.

 

they are evo-r, but you can get the same thing on ebay for cheaper now, seller name jumbodepot

use silicone adhesive glue, no tape.

 

stay away from Jumbodepot!!! I bought there CF dash kit and not only did they send me wrong pieces but the right pieces fit like crap.

 

They all fit like crap unless you buy rsw brand.

My evo r required alot of adjustment.. just dont use tape.. there's zero room for it.. requires silicone adhesive.

I did alot of polishing n filing..end result is great. Im.sure ol jumbo depo is the same parts as evo r.

 

I payed $350 to get it done. I pulled the headliner out and installed it myself. It looks and feels great. It does look a little out of place at the moment because thats the only part of the car with the diamond stiching so I wanna throw some more in there but cant decide where

 

where did you order the fabric if you don't mind? i want the brown lol

 

+1 I like to know too!

 

i found
http://www.fabric4home.com/

but idk if they are legit?

 

Basically stock, just did the kevlar dash (isn't finished yet)

Still needs to be cleaned up (this weekend project) as well as a new coat of epoxy and smooth everything out.

 

http://www.ball2ufall.com/fabrics/

kinda shady, you have to call some random number to order, but it showed up and looks great. Number to order: 646-296-5992

 

nothing special

sorry for unclear pic

 

^^ looks like marshalls. Local dude.


ah todays amazing find is still giving me a hard on.

Jackson posted this pic n ebay link he saw previously on the gated shifter thread today.,. and wouldnt ya know it.. i am now the owner of this one of a kind hand built piece. paid shipped and on its way, ebay link removed woohoo!!
(Thanks again btw Jackeh!)

along w my TWM stuff, this should look ILL.. i plan on some adpatations, so dont fear, you wont see the rubber boot, and it wonr rattle as bad as you think, but even if it does.. EETS MIIIIIINE!

 

^dangggg nice! how do you plan on covering the rubber boot?

 

heres the plan..

im actually going to trace out the pattern onto a piece of black plastic ( somthing very slick and almost p-tex ( like a snowboard bottom) and have it cut out just a HAIR smaller than the gates, that way the shifter will ride on it, and i will layer up a few before i cut them out, so I can replace them when they get worn..

also to cover the boot, Im going to source a bowl ( seriously, im going to ikea for a cheap plastic bowl) thats smaller by a good degree than the metal shifter "bowl", and just trim it so it clears everything inside the shift area, which is not going to be hard.

The WORST case scenario is to just resue one of the many leather shift boots or even a black suede boot down inside there, and i actually have the Z toys aluminum finisher already too.. so safe to say, i have SEVERAL TWM shift *****, a few Greddy, a CARBON ball, and an ARC style ti ball as well I can experiment with.. bro you know me, my garage is FILLED w boxes and bubble wrap just FULL of 350z toys and parts.

I had my TWM short shifter threaded area cut off ( about 1.5 in) and then had the rest of wwhat was left threaded all the way down, so i can experiment w different shift extenders, widths, and finishes.. I be good to go.. stoked.. will be dope to look down at this thing while im crusing.. cant frikin wait.. my finished prodct will clown whats shown in the pictures now.

 

did you give them your card information over the phone?

 

i want that ti **** lmao

 

Got it done today



Enjoy!

 

Yup. Stuff showed up a week later.

 

Love the red, looks great. What kind of shift **** finisher is that?

 

gated shifter looks hot