which is better, Stillen or Zee Front License Bracket?
#1
Registered User
Thread Starter
iTrader: (5)
Join Date: May 2007
Location: cali
Posts: 102
Likes: 0
Received 0 Likes
on
0 Posts
which is better, Stillen or Zee Front License Bracket?
does anyone have any experience with both? any pros and cons on each?
Thanks guys
http://www.stillen.com/product.asp?i...T01&c=EX&m=all
http://upfrontent.com/index.html
Thanks guys
http://www.stillen.com/product.asp?i...T01&c=EX&m=all
http://upfrontent.com/index.html
#2
Registered User
Join Date: May 2007
Location: Arcadia, CA
Posts: 20
Likes: 0
Received 0 Likes
on
0 Posts
I'm not sure how the Zee attaches to your front bumper, but I know stillen utilizes your towing hook found next to your jack in your trunk. Zee seems to be an easier install, but I'm sure you can't go wrong with either.
Not trying to highjack your thread, but do either of these fit the 2007 Z?
Not trying to highjack your thread, but do either of these fit the 2007 Z?
#4
That's bad juju
iTrader: (21)
Join Date: Mar 2006
Location: Project Hollywood...PUAs UNITE
Posts: 3,329
Likes: 0
Received 0 Likes
on
0 Posts
the Z bracket attaches to the black pieces in the center of the bumper. no drilling involved. i have one and i love it. half the price of the stillen bracket and no worries about it failing on you. i have personally seen a stillen bracket's threads bind into the tow hook and license bracket threads strip. the end result, the tube needed to be cut off and tow hook hole re-threaded.
get the Z bracket, no problems whatsoever.
get the Z bracket, no problems whatsoever.
#5
Registered User
Thread Starter
iTrader: (5)
Join Date: May 2007
Location: cali
Posts: 102
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by CEO350Z
the Z bracket attaches to the black pieces in the center of the bumper. no drilling involved. i have one and i love it. half the price of the stillen bracket and no worries about it failing on you. i have personally seen a stillen bracket's threads bind into the tow hook and license bracket threads strip. the end result, the tube needed to be cut off and tow hook hole re-threaded.
get the Z bracket, no problems whatsoever.
get the Z bracket, no problems whatsoever.
http://www.courtesyparts.com/Merchan..._Code=ZEE-BRCT
#6
That's bad juju
iTrader: (21)
Join Date: Mar 2006
Location: Project Hollywood...PUAs UNITE
Posts: 3,329
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by orbitalpunk
The instructions for the zee bracket on this page say you need to drill holes in the grill. are we talking about the same bracket?
http://www.courtesyparts.com/Merchan..._Code=ZEE-BRCT
http://www.courtesyparts.com/Merchan..._Code=ZEE-BRCT
even with drilling, i'd get it over the stillen one
Trending Topics
#8
Registered User
Thread Starter
iTrader: (5)
Join Date: May 2007
Location: cali
Posts: 102
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by CEO350Z
for the 03-05 because of the grill design, you might have too. i zipped tied my plate when i had my 03. but i'm assuming you're putting it on an 07, so no, you don't need to drill. i have it on my nismo v2 and had it on my 06 stock bumper. NO need to drill for 06+
even with drilling, i'd get it over the stillen one
even with drilling, i'd get it over the stillen one
thanks again
ps. yes its an 07
Thread
Thread Starter
Forum
Replies
Last Post
350z, 370z, bracket, cooling, front, install, installation, instructions, licence, license, plate, stillen, video, zee, zeebracket