Re-painted Nismo V1 and door handles *pics*
Re-painted Nismo V1 and door handles *pics*
So re-painted the V1, blacked out the middle bar, and the tow-hook cover. Also had my door-handles matched to my wheels. Put on the new R1 rotors, and had the calipers painted with some high-temp paint. Hope you enjoy--
Shot with E4600 at 2007-08-18
Shot with E4600 at 2007-08-18
Shot with E4600 at 2007-08-18
Shot with E4600 at 2007-08-18
Shot with E4600 at 2007-08-18
IN MOTION/CLICK FOR SHORT VID
Shot with E4600 at 2007-08-18
Shot with E4600 at 2007-08-18
Shot with E4600 at 2007-08-18
Shot with E4600 at 2007-08-18
Shot with E4600 at 2007-08-18
IN MOTION/CLICK FOR SHORT VID
Last edited by bam025; Aug 19, 2007 at 07:00 AM.
Trending Topics
Registered User
Joined: Aug 2005
Posts: 344
Likes: 0
From: Lake City, MN
Looks sweet man. What size tires do you got and brand? and are your rear rims +23 offset? I have the same wheels but with +23 offset and i had to roll my fenders with 285 BFG KDWs. Just wondering bc you lowered it and wondered if you have any issues with rubbing?
answer to a few questions:
I'm running a +23 offset, with a Tein S-Tech drop. I had my fenders cut and smoothed down. Cost about 40 to do that. I'm also running BFG KDW 285/35/19.
All the paint work is down by G and S in Nashville. Let me know if you need his number. 2 guys work in the shop and I've been using him for about 5 years.
As for the taillights and turn signal....they are not tinted with a film. They were sanded down and sprayed with black paint. I had Bat's overlays but after 2 years the edges started to peel a little. There is a write up in the DIY on how to do this.
Thxs--for all the compliments....I just need some damn FI now....lol
I'm running a +23 offset, with a Tein S-Tech drop. I had my fenders cut and smoothed down. Cost about 40 to do that. I'm also running BFG KDW 285/35/19.
All the paint work is down by G and S in Nashville. Let me know if you need his number. 2 guys work in the shop and I've been using him for about 5 years.
As for the taillights and turn signal....they are not tinted with a film. They were sanded down and sprayed with black paint. I had Bat's overlays but after 2 years the edges started to peel a little. There is a write up in the DIY on how to do this.
Thxs--for all the compliments....I just need some damn FI now....lol
