Wierd Seibon VS Lip Fitment
02-17-2008, 06:58 PM
#21
Originally Posted by genegoesfast
I'm pretty capable in most regards when it comes to installs and I'm not seeing what they could do that I couldn't...I took the bumper off and bent it...what else...Gallon of Crisco
Do keep in mind, you could EASILY screw it up. but once its heated you should be able to have 2 people easily pull it to size and install it.
Then again I'm crazy, first thing I did to my then brand new 07 GSX-R1000 was take a heat gun to all the plastics and remove the stickers. Same goes for my 350Z, heatgun on the dealer stickers and 350Z badge.
02-17-2008, 07:04 PM
#23
Originally Posted by genegoesfast
you talking about heat gun on the carbon?
I've had good luck with heat guns on random things, its something I'd try. Again the key is knowing when you're going toooo far. Never get to that point and even if it doesn't work, no harm is done. Think of how hot the hood gets sitting right over top of a turbo charger and sitting in the sun. its worth a shot. Maybe even make your own piece of CF using basic supplies from the store, let it harden up and then heat it with the gun to see if it softens up.
just an idea.
02-17-2008, 07:14 PM
#24
New Member
iTrader: (5)
Join Date: Apr 2007
Location: tennessee
Posts: 212
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by jeffie7
You bitched at the fact that Chuck said he would pay for return shipping and Jim clearly stated in one of the replys that was BEFORE chuck knew the full story of what was going on. After Jim explained to chuck what the problem was he stopped the return pickup.
But back on topic, yes they are a PITA to install, i understand that, which is why i've taken it to two places, but sometimes they dont fit period. I'm an example of it and so is he. The heat gun might work, I wouldn't know i never tried it but what would happen when the heat is gone and the lip shrinks? Wouldn't that still cause it to crack? The lip will only expand for so long...
02-17-2008, 07:23 PM
#25
Originally Posted by jperleon
Actually chucky boy knew the full story because i told him on the phone personally. But my thread is over and i'm not ruining this guys thread talking about it.
But back on topic, yes they are a PITA to install, i understand that, which is why i've taken it to two places, but sometimes they dont fit period. I'm an example of it and so is he. The heat gun might work, I wouldn't know i never tried it but what would happen when the heat is gone and the lip shrinks? Wouldn't that still cause it to crack? The lip will only expand for so long...
But back on topic, yes they are a PITA to install, i understand that, which is why i've taken it to two places, but sometimes they dont fit period. I'm an example of it and so is he. The heat gun might work, I wouldn't know i never tried it but what would happen when the heat is gone and the lip shrinks? Wouldn't that still cause it to crack? The lip will only expand for so long...
Again I can't push the point enough, heating it will take skill and if done wrong it could mess it up bad, If you've ever painted before, you should be able to heat it. Use the same type of strokes, making sure to get very even coverage.
02-17-2008, 07:35 PM
#27
Originally Posted by jperleon
Oh, i've never painted nor used a heatgun. But that makes sense, I didnt think about it holding its new shape....
Again not something I've done but something I would do if I had to.
Will it work? someone give it a try!
02-17-2008, 07:59 PM
#29
New Member
iTrader: (5)
Join Date: Apr 2007
Location: tennessee
Posts: 212
Likes: 0
Received 0 Likes
on
0 Posts
well seeing as i'm stuck with the extra lip i would give it a try but lacking experience in both painting and heating i'm sure i would screw it up and not be able to give a correct answer to if it would work or not. haha
02-17-2008, 08:03 PM
#31
Originally Posted by jperleon
well seeing as i'm stuck with the extra lip i would give it a try but lacking experience in both painting and heating i'm sure i would screw it up and not be able to give a correct answer to if it would work or not. haha
I run a local business and feel that his offer was very fair.
02-17-2008, 08:11 PM
#32
Registered User
iTrader: (15)
Join Date: Jun 2006
Location: Get out my way pimpin', FL
Posts: 8,269
Likes: 0
Received 2 Likes
on
2 Posts
Originally Posted by Abishop
i say, don't **** up the lip, if it don't fit send it back.
technically, since he has already tried to install it,he wont be able return it
Thread
Thread Starter
Forum
Replies
Last Post
wanderingstuden
Maintenance & Repair
6
01-28-2016 07:03 PM
