When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
man that looks bad as hell. hey alvin how do you the rear bumper ?
I just drilled three bolts to mount the bumper into the rear reinforcement bar. It was easy. I took my time and it took me 20 minutes but some people did it in like 5 minutes haha. One bolt in the middle and one on each end.
Originally Posted by USN HM 350Z
rolled
Hoping you'd say that. I'll try to get some better pictures very soon.
Looks good man. Only thing is...your HKS exhaust is crooked. Or is it me? It seems that the right side is higher up than the left judging by how the secondary canisters are tucked more on the right than the left. More shots man lol
i think the bumper mod flows well w/ a stock bumper only.
IMO i think it looks too busy with the nismo rears - too many body lines.
... if you drilled the bumper into the re-bar its pretty much permanent (right?) unless you plan on using another bumper or repairing the drill holes.
(i've got this mod done myself - drilled as well with a aluminum bracket for support ala offsetz33)
Haha, show me how fast you can text, email, browse the web compared to me on my iphone It might have a shitty camera in low light but the iPhone's functionality beat all other phones on the market right now.
Looks good man. Only thing is...your HKS exhaust is crooked. Or is it me? It seems that the right side is higher up than the left judging by how the secondary canisters are tucked more on the right than the left. More shots man lol
I have a bad rubber hanging on the drivers side. It was cut slightly to remove my stock exhaust and now the cut got worse so I ordered a new one. However, after checking a few more pictures I think the drivers side canister is a bit lower because of the design as well. Once I get the new hanger next week I'll be able to take more pictures and determine if its indeed the design or just my hanger issue