Lets says that im measuring at 27" at hot spot. There are Two cut off lines; (Top and Bottom) I don't know where is the hot spot for my 06 350Z. Should i use the Top cut off line to hit 27" or the Bottom cut off line to hit 27"

 

Dont look at the top or bottom lines. Look at the "hot spot", the brightest spot on the center.

 

Check this out:
http://www.hypersprite.com/auto/tech-z-003/index.asp


The left side can never be really even with the right. If you try to raise too much, the left side will point up in the trees and still won't be even. They say this was done as too not blind oncoming traffic.



Ref: Black Z Eddie

 

Thats just how mine are. thanks. I was thinking something was wrong after having my light's blacked out on my 06. I still may do the HyperSprite just to get then all re-setup

 

Yeah, That's what i'm planning on doing too. I just got my right headlight replaced so they're not 100% accurate. I'm just kinda lazy today. I'll get to it later, I plan on painting my stock brake calipers later today.

 

Measure to the top of the hotspot.

Measure 26.5". When I did 27" I was getting flashed by other people.

 

im still confusing man. If you don't mind, could you please mark it on the pic where the hot-spot will be?
is hot-spot located at the middle between top and low cut off line ?
For my 06 , it has really clear cut off line and i couldn't really find the hot-spot. it seems like top cut off line.

 

I'll go out and take a picture in a few minutes. Gotta go out and do some measurements anyway.

 

DAMN hopefully it was girls... I'mma have to raise mine a lil bit. :P

 

See if this helps. Is not my car, I got it from the net. So it doesnt look exactly like our headlights, but its pretty much the same in the fact that the left side is lower that the right.

 

 

I really appreciated it 'Spork' and 'midtx350Z'. I am a new member here. What's Premier Member since im a Registered User and I wanna put my own avatar too, but there is only Pre-defined Standard available for me
Tks.

 

Go to ur "User CP", and go to the very bottom left hand corner, and click on Paid Subcription. It has all the info in there and its like 29 bucks a year. Pretty cool.

 

You have to be a to have custom avatar

 

I understood, thanks yall !

 

Always glad to help. Just be sure to have a 1ft+ philips head screwdriver handy for the adjustments.

 

No Prob, and welcome to the site

 

Your mom has a screwdriver handy for the adjustments

sry

 

Welcome, Check out the Austin section of the site.

https://my350z.com/forum/texas-41/

 

Mine is #2 x 20" Philips. It is freaking long lol. Tks for that tip though.
Yall are really kind! A+