headlights w/o amber strip-7500k blue hid
#1
Registered User
Thread Starter
Join Date: Nov 2003
Location: oakland,CA
Posts: 195
Likes: 0
Received 0 Likes
on
0 Posts
headlights w/o amber strip-7500k blue hid
This process took ' bout 4hrs , 4 hands, dust free room/table a
good heat gun, a tube of black silicone and Neosporin.
oem HID's replaced with hella 7500k blue. make sure to seal up the oem ballast (3" hole when removed) on the bottom of the headlight assembly. use dynamat.
Next plan: HID foglights behind the grills(5.5")round sealed beam
(Hella conversion)
good heat gun, a tube of black silicone and Neosporin.
oem HID's replaced with hella 7500k blue. make sure to seal up the oem ballast (3" hole when removed) on the bottom of the headlight assembly. use dynamat.
Next plan: HID foglights behind the grills(5.5")round sealed beam
(Hella conversion)
Last edited by big-al; 11-30-2003 at 05:22 PM.
Trending Topics
#11
Registered User
Thread Starter
Join Date: Nov 2003
Location: oakland,CA
Posts: 195
Likes: 0
Received 0 Likes
on
0 Posts
the amber strip is just a piece of plastic clipped on to the assembly,
just use something soft to remove it so it won't leave any marks.
sorry, my fingers still hurtin.
just use something soft to remove it so it won't leave any marks.
sorry, my fingers still hurtin.
Last edited by big-al; 11-30-2003 at 08:14 PM.
#14
Registered User
Thread Starter
Join Date: Nov 2003
Location: oakland,CA
Posts: 195
Likes: 0
Received 0 Likes
on
0 Posts
doesn't need oven. just a good heat gun and a lot of patience. you'll need to warm the glue for about 20min. before using high heat or there will be major damage!!!!!
after removal, check for lint before reassemble.
I use white led lights for replacements.
after removal, check for lint before reassemble.
I use white led lights for replacements.
#20
Registered User
iTrader: (4)
Join Date: May 2003
Location: Toronto
Posts: 1,611
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by Blue Batmobile
Nice job. I have an Overlay made of chrome Vinyl that will give you the same effect. I left the part where the lamp is open.
Bat™
Nice job. I have an Overlay made of chrome Vinyl that will give you the same effect. I left the part where the lamp is open.
Bat™