Any concept pictures of hoods / bumpers not produced?
#83
Vendor - Former Vendor
Thread Starter
Join Date: May 2008
Location: San Diego, CA
Posts: 148
Likes: 0
Received 0 Likes
on
0 Posts
A. Undertray Diffuser
1. ReV2Red
2.
3.
4.
5.
B. Front Fenders (apx 1") Wider with vent
Group Buy Started:
http://www.cianciusa.com/nissan-350z...nders-110.html
1. 03Z33
2. Flo-RidaZ33
3. turbotom
4. ReV2Red
5. NZMOWND
6. dikspiel
7.
8.
9.
10.
C. Front Bumper
1.
2.
3.
4.
5.
D. New hood
1. 03Z33
2. turbotom
3.
4.
5.
- Our website has been updated with project details for the Front fenders. Please note that we will start on the fenders next week. The discounted price will only be available until the prototype fenders are finished. Once we being creating the molds we will no longer offer the discounted price.
- At this time we are only going to offer fiberglass. We can produce Carbon fiber fenders but they will be around $950 + s/h for the set in pure carbon (no fiberglass backing). At the time we are ready to ship if you would like to upgrade your purchase to carbon fiber fenders that is fine. For now we will only accept payments for the fiberglass unit price.
1. ReV2Red
2.
3.
4.
5.
B. Front Fenders (apx 1") Wider with vent
Group Buy Started:
http://www.cianciusa.com/nissan-350z...nders-110.html
1. 03Z33
2. Flo-RidaZ33
3. turbotom
4. ReV2Red
5. NZMOWND
6. dikspiel
7.
8.
9.
10.
C. Front Bumper
1.
2.
3.
4.
5.
D. New hood
1. 03Z33
2. turbotom
3.
4.
5.
- Our website has been updated with project details for the Front fenders. Please note that we will start on the fenders next week. The discounted price will only be available until the prototype fenders are finished. Once we being creating the molds we will no longer offer the discounted price.
- At this time we are only going to offer fiberglass. We can produce Carbon fiber fenders but they will be around $950 + s/h for the set in pure carbon (no fiberglass backing). At the time we are ready to ship if you would like to upgrade your purchase to carbon fiber fenders that is fine. For now we will only accept payments for the fiberglass unit price.
#86
Vendor - Former Vendor
Thread Starter
Join Date: May 2008
Location: San Diego, CA
Posts: 148
Likes: 0
Received 0 Likes
on
0 Posts
Well it looks like the wide body fenders will have to get pushed back a bit, since we haven't had anyone purchase them at the group buy price on our website
Hopefully within a week or so we can get some more people to go for them
Hopefully within a week or so we can get some more people to go for them
#87
Registered User
iTrader: (2)
qount me in for new diffuser/hood if the style similar to
hood
MCR for HR
Power enterprise lifted hood with small vent in the middle
lip (if lip+diffuser)
same as amuse diffuser but it only fot on amuse front bumper if u can make similar one
but to fit stock 350z bumper that would be great
RSW front lip ( similar to classic racing cars lip )
same as varis V1
power enter prise lip
hood
MCR for HR
Power enterprise lifted hood with small vent in the middle
lip (if lip+diffuser)
same as amuse diffuser but it only fot on amuse front bumper if u can make similar one
but to fit stock 350z bumper that would be great
RSW front lip ( similar to classic racing cars lip )
same as varis V1
power enter prise lip
Last edited by 350z-900whp; 06-14-2011 at 09:48 PM.
#90
Registered User
iTrader: (14)
This photo has been in 2 threads lately and quite a few people seemed interested. It looks to be a photoshoped S2000 rear diffuser(not sure if copying a design from another car would count)
I think going with some simple add on's would sell. Such as
front lip/diffuser(like Varis, top secret)
Side add on(Varis, chargespeed)
Rear diffuser(top secret, pic poster)
I'm not saying make a replica of these but some thing similar and simple.
I think going with some simple add on's would sell. Such as
front lip/diffuser(like Varis, top secret)
Side add on(Varis, chargespeed)
Rear diffuser(top secret, pic poster)
I'm not saying make a replica of these but some thing similar and simple.
#92
Vendor - Former Vendor
Thread Starter
Join Date: May 2008
Location: San Diego, CA
Posts: 148
Likes: 0
Received 0 Likes
on
0 Posts
They all look like great ideas.. just keep adding to the list and we can keep going forward. We are still hoping to see atleast 5 people pull the trigger on the wide body fenders.. No one has wanted to commit to making them happen yet.
#93
I haz da turbos
iTrader: (9)
Join Date: Jan 2006
Location: In the basement
Posts: 1,621
Likes: 0
Received 0 Likes
on
0 Posts
So you guys are making parts for ferraris and corvettes, and you dont have the capital to make a mold for a fender?
If your going to wait for people to pay before you make the product, i dont think your going to do too well in the 350Z scene, because a)people here like to see the finished product and fitment before they pay, and b)most people here already have a bodykit and parts, and most of the time they will only swap them out if its a better quality part, which brings us back to a).
If your going to wait for people to pay before you make the product, i dont think your going to do too well in the 350Z scene, because a)people here like to see the finished product and fitment before they pay, and b)most people here already have a bodykit and parts, and most of the time they will only swap them out if its a better quality part, which brings us back to a).
#94
Registered User
iTrader: (85)
i like the b fender, and would be interested in picking them up once i see fitment/quality, as stated above, bringing us back to a.
i would also be interested in a simple widebody. something along the lines of top secret fenders, simple sides/front/rear that flows well with the car. not very many widebody kits are there that are appealing
i would also be interested in a simple widebody. something along the lines of top secret fenders, simple sides/front/rear that flows well with the car. not very many widebody kits are there that are appealing
#96
Vendor - Former Vendor
Thread Starter
Join Date: May 2008
Location: San Diego, CA
Posts: 148
Likes: 0
Received 0 Likes
on
0 Posts
So you guys are making parts for ferraris and corvettes, and you dont have the capital to make a mold for a fender?
If your going to wait for people to pay before you make the product, i dont think your going to do too well in the 350Z scene, because a)people here like to see the finished product and fitment before they pay, and b)most people here already have a bodykit and parts, and most of the time they will only swap them out if its a better quality part, which brings us back to a).
If your going to wait for people to pay before you make the product, i dont think your going to do too well in the 350Z scene, because a)people here like to see the finished product and fitment before they pay, and b)most people here already have a bodykit and parts, and most of the time they will only swap them out if its a better quality part, which brings us back to a).
When you have 20-30 people committed to a new design on other forums and they are willing to pre-pay to make it a reality, its hard to convince the owners to put aside paying projects for ones that "we hope" they will sell.
I'm sure at some point some of the fenders will sell, but unless we can get some people to commit to the project its going to be put on hold for awhile.
#99
Registered User
iTrader: (8)
Join Date: Feb 2008
Location: Chicago
Posts: 290
Likes: 0
Received 0 Likes
on
0 Posts
A. Undertray Diffuser
1. ReV2Red
2.
3.
4.
5.
B. Front Fenders (apx 1") Wider with vent
Group Buy Started:
http://www.cianciusa.com/nissan-350z...nders-110.html
1. 03Z33
2. Flo-RidaZ33
3. turbotom
4. ReV2Red
5. NZMOWND
6. dikspiel
7.
8.
9.
10.
C. Front Bumper
1.
2.
3.
4.
5.
D. New hood
1. 03Z33
2. turbotom
3. tonyzs/c03
4. graffkid732
5.
dont forget to put your name on the list
1. ReV2Red
2.
3.
4.
5.
B. Front Fenders (apx 1") Wider with vent
Group Buy Started:
http://www.cianciusa.com/nissan-350z...nders-110.html
1. 03Z33
2. Flo-RidaZ33
3. turbotom
4. ReV2Red
5. NZMOWND
6. dikspiel
7.
8.
9.
10.
C. Front Bumper
1.
2.
3.
4.
5.
D. New hood
1. 03Z33
2. turbotom
3. tonyzs/c03
4. graffkid732
5.
dont forget to put your name on the list
Last edited by TurboTom; 06-19-2011 at 10:56 PM.
#100
Vendor - Former Vendor
Thread Starter
Join Date: May 2008
Location: San Diego, CA
Posts: 148
Likes: 0
Received 0 Likes
on
0 Posts
Basically we are going to finish out this last project for the 350z without any group buy payments and just see what happens. If the 10 people come through and purchase the set after they are released we will continue building new designs for the 350z.