Notices
Exterior & Interior 350Z Body modification, interior styling and lighting

Don't use LED's from oznium.com

Thread Tools
 
Search this Thread
 
Old 05-27-2011 | 10:39 PM
  #1  
dcains's Avatar
dcains
Thread Starter
Registered User
iTrader: (15)
 
Joined: Aug 2009
Posts: 5,126
Likes: 435
From: Lutz, FL
Default Don't use LED's from oznium.com

Some of you may have seen my post about a year ago showing LED strips installed in my '08 Z clear corner reflectors. For those who haven't, here are a few pics taken shortly after the install:





Pretty nice, right? Well, after several months 3 LED's failed in the passenger side reflector, and I almost never drive the Z at night. I sent an email to oznium.com, vendor of the LED strips, asking about this problem, and I received no reply. I sent another email in mid-December, and still nothing. Great products, and customer service, not.

Here we are a year later, and more LED's have failed, on both sides of the car:





Live and learn, and while the LED's strips seemed a bargain at only $12 each, obviously I got what I paid for. I guess I'll have to crack the reflectors open again, and this time I'll use discrete LED's on a circuit board, similar to the reflectors sold by FliPPER_Z. I don't think I'll approach his level of craftsmanship my first try, but I'd rather build these myself and will enjoy the task. For those not so handy, the reflectors from Flipper_Z are the best, and he's got many different custom configurations available.

PS. A few months back I got a PM from a member here, who had followed my instructions for building these reflectors, and almost right away he had a similar failure with his Oznium LED's. I've been meaning to post this thread for a while, but it slipped my mind until I got a PM from another member tonight asking about the reflectors in my car.

Last edited by dcains; 05-27-2011 at 10:45 PM.
Old 05-28-2011 | 02:11 PM
  #2  
shakuya88's Avatar
shakuya88
New Member
 
Joined: Jul 2008
Posts: 512
Likes: 0
From: Massachusetts
Default

I've personally been using oznium products for 4+ years, some of those still on the car today and working 100% (the ones that aren't on the car still work and just got removed...I grew out my early slightly ricer days ) like the day I bought them. Always fast shipping and great customer service. Couple months back I got a reply in 20 minutes about a question. Sucks you had a bad experience, but I've always had good luck with them. Just my $.02
Old 05-28-2011 | 02:12 PM
  #3  
shakuya88's Avatar
shakuya88
New Member
 
Joined: Jul 2008
Posts: 512
Likes: 0
From: Massachusetts
Default

P.S. That does look awesome...the pre pics
Old 05-28-2011 | 02:44 PM
  #4  
Stock2Autocrozz's Avatar
Stock2Autocrozz
Registered User
iTrader: (6)
 
Joined: Apr 2009
Posts: 2,543
Likes: 2
From: MN
Default

It seems that all LED's eventually go the way-side... v-leds.com are the only ones I keep hearing good things about
Old 05-28-2011 | 02:46 PM
  #5  
Kuhan's Avatar
Kuhan
Registered User
iTrader: (17)
 
Joined: Jan 2009
Posts: 1,208
Likes: 1
From: Chicago, IL
Default

That sucks to see. Good luck with the next project.

I bought the led strips from v-leds for my reflectors, hopefully they last a little longer.

I have these (8 leds per reflector).
Old 05-28-2011 | 02:48 PM
  #6  
dcains's Avatar
dcains
Thread Starter
Registered User
iTrader: (15)
 
Joined: Aug 2009
Posts: 5,126
Likes: 435
From: Lutz, FL
Default

Well, I'd say it's my own fault for buying the LED strips before reading the reviews. True that many reviewers commented on Oznium's fast service, but if you read the reviews for the LED strips I bought, many (if not most) reviews mention failed LED's after a short time. Maybe in some apps they're easy to swap out, but once they're sealed in the front reflectors it's a different story. Hopefully I'll be able to reuse my reflectors and rebuild them using some high-quality discrete LED's.

As an aside, all the original bulbs (except the HID's of course) in my Z and my wife's Acura TL-S have been replaced with LED's from superbrightleds.com, and I haven't had a single failure after ~ 2 years of use.
Old 05-29-2011 | 02:44 PM
  #7  
FliPPER_Z's Avatar
FliPPER_Z
Registered User
iTrader: (16)
 
Joined: Sep 2008
Posts: 1,234
Likes: 0
From: South Padre Island, Tx
Default

Originally Posted by dcains
Hopefully I'll be able to reuse my reflectors and rebuild them using some high-quality discrete LED's.

Cree , Nichia , Phillips Limileds > Any aftermarked/china LEDs
Old 05-29-2011 | 07:37 PM
  #8  
dcains's Avatar
dcains
Thread Starter
Registered User
iTrader: (15)
 
Joined: Aug 2009
Posts: 5,126
Likes: 435
From: Lutz, FL
Default

Thanks.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Lt_Ballzacki
Brakes & Suspension
39
08-06-2021 07:19 AM
350z82
Exterior & Interior
19
10-01-2015 07:25 PM
Depravity
Brakes & Suspension
14
10-01-2015 05:49 PM




All times are GMT -8. The time now is 12:32 PM.