'06+ Front Bumper on '03-'05 Z?
09-07-2011, 02:56 AM
#2
Registered User
iTrader: (4)
Join Date: Feb 2009
Location: KS
Posts: 95
Likes: 0
Received 0 Likes
on
0 Posts
it will fit but needs some work.. holes on bottom under tray and fender liner won't fit directly with oem bolts...and holes where fenders are have 2 bolts on each side... 1 hole will not match up. Is it temporarily? if so, I'd use zip ties.
Last edited by BaoZer; 09-07-2011 at 03:06 AM.
09-07-2011, 09:10 AM
#4
Registered User
Thread Starter
iTrader: (7)
Join Date: Apr 2010
Location: Fullerton, Ca
Posts: 252
Likes: 0
Received 0 Likes
on
0 Posts
its the front bumper. didnt want it to be a temp. wanted to go back to stock and ended up with a cheap front bumper. seems like i should just look for an 08. thanks for the input guys =]
09-07-2011, 09:47 AM
#5
Registered User
Join Date: Jun 2011
Location: South El Monte, CA
Posts: 42
Likes: 0
Received 0 Likes
on
0 Posts
Kswoopz26,
The OEM part # for a '04 front bumper is 62022-CD040 and FBM22-CF40H for the '08, so as the BaoZer pointed out there will be a few discrepancies with the fit.
I'm sure that some brave Z owner has undertaken this swap though so I'd perform a Google search and see what kind of results it yields
The OEM part # for a '04 front bumper is 62022-CD040 and FBM22-CF40H for the '08, so as the BaoZer pointed out there will be a few discrepancies with the fit.
I'm sure that some brave Z owner has undertaken this swap though so I'd perform a Google search and see what kind of results it yields
09-07-2011, 01:30 PM
#7
Title changed to reflect your question and allow for easier searching for everyone else in the future.
This is not a new subject and I've already answered the question in this thread:
https://my350z.com/forum/exterior-an...fit-2003-a.htm
This is not a new subject and I've already answered the question in this thread:
https://my350z.com/forum/exterior-an...fit-2003-a.htm
Thread
Thread Starter
Forum
Replies
Last Post
