Fittings
#1
Registered User
Thread Starter
Join Date: Dec 2012
Location: Burlington, ON
Posts: 35
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://my350z.com/forum/images/icons/icon1.gif)
with regards to design similarity of 2003 - 2008 350Z's, what would fit universally and which wouldn't?
E.g - Would a 2005 Front Bumper fit on an 03? Would there be certain parts that are completely interchangeable while others restricted?
I have been creating a basic layout what i plan to do with my car come the summer but before i buy anything i want to know where ill be able to save and where i will have to spend the most.
Smart Tuning. Hopefully.
Thanks everyone!
E.g - Would a 2005 Front Bumper fit on an 03? Would there be certain parts that are completely interchangeable while others restricted?
I have been creating a basic layout what i plan to do with my car come the summer but before i buy anything i want to know where ill be able to save and where i will have to spend the most.
Smart Tuning. Hopefully.
Thanks everyone!
#2
Registered User
![Default](https://my350z.com/forum/images/icons/icon1.gif)
You could look at the courtesy parts site to see what parts are common with different model years.
http://www.courtesyparts.com/350z-pa...c-714_715.html
http://www.courtesyparts.com/350z-pa...c-714_715.html
#3
![Default](https://my350z.com/forum/images/icons/icon1.gif)
03-05 bumpers are the same.
Edit: re-read the post. You can install any non-Nismo front bumper on any Z using the supplied hardware from any year. The only problem is putting a 06+ bumper on a 03-05 will leave a small gap from the fender liner to the lower corners of the bumper...but all the hardware still bolts up. Due to the 06+ bumper being wider at the bottom I don't believe you can put a 03-05 bumper on a 06+ without trimming the fender liner a little bit but I don't know anyone who has tried.
Edit: re-read the post. You can install any non-Nismo front bumper on any Z using the supplied hardware from any year. The only problem is putting a 06+ bumper on a 03-05 will leave a small gap from the fender liner to the lower corners of the bumper...but all the hardware still bolts up. Due to the 06+ bumper being wider at the bottom I don't believe you can put a 03-05 bumper on a 06+ without trimming the fender liner a little bit but I don't know anyone who has tried.
Last edited by AdvanZ33; 01-07-2013 at 12:52 PM.
#4
![Default](https://my350z.com/forum/images/icons/icon1.gif)
Strange title, if you would have searched you would have found the following threads:
https://my350z.com/forum/exterior-an...on-2006-a.html
https://my350z.com/forum/exterior-an...on-2003-a.html
https://my350z.com/forum/exterior-an...on-2006-a.html
https://my350z.com/forum/exterior-an...on-2003-a.html
Thread
Thread Starter
Forum
Replies
Last Post