'03-'05 350Z Nismo V3 front - what is needed?
#1
New Member
Thread Starter
Join Date: Sep 2002
Location: Colorado Springs, CO
Posts: 375
Likes: 0
Received 0 Likes
on
0 Posts
'03-'05 350Z Nismo V3 front - what is needed?
For those who have replaced the factory front fascia of an 03 - 05 350z with the Nismo V3 front fascia, I'm trying to understand what additional parts are needed for fitment.
Obviously you need the polyurethane fascia:
I understand you also need the side reflectors (b/c the 03-05 side reflectors won't fit):
You'll need the Z Speed underbody extension or the factory Nissan version (Z Speed shown):
These side corner pieces are helpful:
But what about the 06+ foam front energy absorber (Nissan part 62090CF40A) ? You can see from the comparison (green arrows) that the 03-05 vs 06+ look different. From anyone who has actually done this, did you need to get the 06+ foam for the new fascia to fit?
Anything I missed?
Obviously you need the polyurethane fascia:
I understand you also need the side reflectors (b/c the 03-05 side reflectors won't fit):
You'll need the Z Speed underbody extension or the factory Nissan version (Z Speed shown):
These side corner pieces are helpful:
But what about the 06+ foam front energy absorber (Nissan part 62090CF40A) ? You can see from the comparison (green arrows) that the 03-05 vs 06+ look different. From anyone who has actually done this, did you need to get the 06+ foam for the new fascia to fit?
Anything I missed?
#4
New Member
iTrader: (1)
What he said. I did a complete V3 conversion to my 05 roadster. I kind of got the 05 fender liners to fit, but the 07-08 liners are probably a perfect fit. Also, Id suggest installing LEDs in place of the amber reflectors for that more modern look. Also, if your undertray is not in good shape, Id suggest replacing it with a steel one like I did.
Thread
Thread Starter
Forum
Replies
Last Post
XERMAN2001
Exterior & Interior
7
03-19-2009 12:48 PM
wduvall
Brakes & Suspension
13
02-07-2007 08:38 AM