Pro car innovations seat base sliders and side mounts (PCI)
#1
Pro car innovations seat base sliders and side mounts (PCI)
Hi everybody I just wanted to share my experience with PCI. I read quite a few threads about people having issues mounting their aftermarket bucket seats. Many bases and side mounts dont line up correctly and/or sit too high. I decided to give PCI a try. They're local to me in socal so it was a quick drive over. Charles and Bryan greeted me and were extremely friendly and helpful.
Assembling the rail went quite quickly took me about 30 minutes. Installing the seat was a breeze. ALL the mounting points lined up including the pin for the transmission tunnel. I have plenty of head room even with a helmet on.
The stock seat belt mount worked out for me as well.
Assembling the rail went quite quickly took me about 30 minutes. Installing the seat was a breeze. ALL the mounting points lined up including the pin for the transmission tunnel. I have plenty of head room even with a helmet on.
The stock seat belt mount worked out for me as well.
The following users liked this post:
rustyschopshop (06-30-2019)
#2
Super Moderator
MY350Z.COM
MY350Z.COM
iTrader: (8)
They look like they might get be low enough
Thread
Thread Starter
Forum
Replies
Last Post
dls350
Exterior & Interior
9
04-15-2012 08:23 AM
97supratt
Interior
8
02-10-2011 05:22 PM