I need to remove my headlights in order to install ares's clear reflector strips when them come in. I took the bumper off and want to make sure I do this right.

Are the screws holding the headlight in place the two phillips screws on the top (these are clearly visibile with the hood open) and the one screw on the bottom left which you can only see with the bumper removed?

Thanks for your help.

 

sounds about right.
if i remember correctly, there are 3 screws per headlight and bumper removal is definitely necessary.

 

I remember removing 4 bolts to get the headlight off......it was really easy though haha.

 

Were they bolts or screws? There are two phillips screws on the top and one on the bottom that I can see. The one on the left side of the headlight (looking down from the top) is a biotch to take out since I don't have a screwdriver that can fit in to remove it. I'm going to go out and buy an offset screwdriver which hopefully will work.

Let me know if you think I'm working on the wrong screws.

Thanks.