Anyone know of a nice urethane lip available for under $200???
#1
Registered User
Thread Starter
iTrader: (1)
Join Date: Aug 2002
Location: Sesame Street
Posts: 5,096
Likes: 0
Received 0 Likes
on
0 Posts
Anyone know of a nice urethane lip available for under $200???
Hi folks.
I am ready to finish the cosmetic aspect of my car. A lady barely dinged my rear bumper and her insurance gave me $600.
I was going to do Stillen integrated rear wing and the GReddy Lip.
The GReddy lip looked good and was only 185 @ Hopup racing. However Steve tells me that they are back ordered up the a$$ and there is no way I am getting one inside of 6 months.
So Help me out guys. Where can I get a nice urethane lip that is 200 or under and what kind should it be?
It has to be subtle. For example, that Evo R wing is too much for me.
Advice???
I am ready to finish the cosmetic aspect of my car. A lady barely dinged my rear bumper and her insurance gave me $600.
I was going to do Stillen integrated rear wing and the GReddy Lip.
The GReddy lip looked good and was only 185 @ Hopup racing. However Steve tells me that they are back ordered up the a$$ and there is no way I am getting one inside of 6 months.
So Help me out guys. Where can I get a nice urethane lip that is 200 or under and what kind should it be?
It has to be subtle. For example, that Evo R wing is too much for me.
Advice???
#3
Registered User
Thread Starter
iTrader: (1)
Join Date: Aug 2002
Location: Sesame Street
Posts: 5,096
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by Blue Batmobile
Veilside 1 Julien, but they run close to $300. Check the For Sale Forum.
Bat™
Veilside 1 Julien, but they run close to $300. Check the For Sale Forum.
Bat™
Andy I can get a whole new FRP Nismo Bumper for 245$!!!
There is no way I am spending more than $200 on a lip. I would rather buy the whole bumper.
#5
Registered User
Thread Starter
iTrader: (1)
Join Date: Aug 2002
Location: Sesame Street
Posts: 5,096
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by Blue Batmobile
Great.
Bat™
Great.
Bat™
PS. Didnt mean to come off as rude Andy! Sorry if I did.
#6
Registered User
iTrader: (2)
my only thoughts on the situation. REmember this is a $27-35K car. I am not sure you wanna put the cheapist aftermarket parts on there just to make it different than stock. I say either wait til you get what you wanted in the 1st place or maybe reconsider spending a little more.
good luck
good luck
#7
Registered User
Thread Starter
iTrader: (1)
Join Date: Aug 2002
Location: Sesame Street
Posts: 5,096
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by rodH
my only thoughts on the situation. REmember this is a $27-35K car. I am not sure you wanna put the cheapist aftermarket parts on there just to make it different than stock. I say either wait til you get what you wanted in the 1st place or maybe reconsider spending a little more.
good luck
my only thoughts on the situation. REmember this is a $27-35K car. I am not sure you wanna put the cheapist aftermarket parts on there just to make it different than stock. I say either wait til you get what you wanted in the 1st place or maybe reconsider spending a little more.
good luck
When it comes to wheels I will shell out the 700 or so per wheel, but it does not cost a tremendous amount of money to stamp out a urethane lip
I dont think I am wrong in expectingto find something at around 200$
Trending Topics
#8
Registered User
iTrader: (4)
Hey Julien,
I'm guessing you factored in the cost of painting the lip too? So a 200 dollar lip will run you a little over 350 after everything is painted and mounted.
There might be a CF alternative in that 350+ price range but you probably don't want to deal with the rigidity and crack factor. Good foresight on the urethane though. My lip kisses the blacktop more than once a month and that flex definitely is a plus.
If you don't mind my opinion, I think the Greddy Gracer lips look beautiful on black cars because they blend well. (seen them in person). It might be stretch but I suggest calling up places and posting up and down these forums. SOMEONE'S gotta have it ...or is letting it go!
Good luck.
I'm guessing you factored in the cost of painting the lip too? So a 200 dollar lip will run you a little over 350 after everything is painted and mounted.
There might be a CF alternative in that 350+ price range but you probably don't want to deal with the rigidity and crack factor. Good foresight on the urethane though. My lip kisses the blacktop more than once a month and that flex definitely is a plus.
If you don't mind my opinion, I think the Greddy Gracer lips look beautiful on black cars because they blend well. (seen them in person). It might be stretch but I suggest calling up places and posting up and down these forums. SOMEONE'S gotta have it ...or is letting it go!
Good luck.
#10
Registered User
Thread Starter
iTrader: (1)
Join Date: Aug 2002
Location: Sesame Street
Posts: 5,096
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by Red6
The only option I think you have is Wings West front air dam in urethane. Its sells for about $190 for the lip.
The only option I think you have is Wings West front air dam in urethane. Its sells for about $190 for the lip.
$174 actually where I found it. Thanks.
I dunno. You guys think that would look okay??
#12
Registered User
Join Date: Dec 2003
Location: Domestic
Posts: 469
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by joust75
$174 actually where I found it. Thanks.
I dunno. You guys think that would look okay??
$174 actually where I found it. Thanks.
I dunno. You guys think that would look okay??
120 + shipping
#15
Registered User
iTrader: (10)
Join Date: May 2003
Location: SF Bay Area
Posts: 3,282
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by 35oZephyR
Looks like one of those lips that might need sideskirts or it'll not look too balanced.
Looks like one of those lips that might need sideskirts or it'll not look too balanced.
#16
Registered User
Thread Starter
iTrader: (1)
Join Date: Aug 2002
Location: Sesame Street
Posts: 5,096
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by mgl
yeah... i agree. def. needs sideskirts or i'll look kinda weird.
yeah... i agree. def. needs sideskirts or i'll look kinda weird.
But dont listen to me, just wait for the pics dude!
Antoine, back me up on this.
#17
Registered User
iTrader: (4)
Originally posted by joust75
Guess I'll have to prove you wrong sir. I have made my decision.
But dont listen to me, just wait for the pics dude!
Antoine, back me up on this.
Guess I'll have to prove you wrong sir. I have made my decision.
But dont listen to me, just wait for the pics dude!
Antoine, back me up on this.
Besides the low angle on the WW pic above makes it look like it's sticking forward more than it should.
Looking forward to seeing the results. Post pics!
#18
Registered User
iTrader: (10)
Join Date: May 2003
Location: SF Bay Area
Posts: 3,282
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by joust75
Guess I'll have to prove you wrong sir. I have made my decision.
But dont listen to me, just wait for the pics dude!
Antoine, back me up on this.
Guess I'll have to prove you wrong sir. I have made my decision.
But dont listen to me, just wait for the pics dude!
Antoine, back me up on this.
sorry but i'm not a "sir" nor am i a "dude"
but i'd like to see pics.
#20
Registered User
Thread Starter
iTrader: (1)
Join Date: Aug 2002
Location: Sesame Street
Posts: 5,096
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by mgl
sorry but i'm not a "sir" nor am i a "dude"
but i'd like to see pics.
sorry but i'm not a "sir" nor am i a "dude"
but i'd like to see pics.