FS: Carbon Fiber Do-Luck Rear Diffuser
Thread Starter
Joined: Jan 2009
Posts: 7,287
Likes: 189
From: Eastern NC
Used Do-Luck rear diffuser normally found on the Do-Luck rear bumper. Fits the OEM rear bumper like it belongs there! I'm including the screws and washers (already black) that I used so all you need to do is line it up and drill a couple holes...I used 3M double-sided tape as well. A few light scratches on the clear coat but nothing you can see when installed.
SOLD




Installed pics:

SOLD




Installed pics:

Last edited by AdvanZ33; Jul 19, 2012 at 07:56 AM.
Trending Topics
Thread Starter
Joined: Jan 2009
Posts: 7,287
Likes: 189
From: Eastern NC
Thanks for the pics Minus. It should be noted, since I didn't post pictures of the back side, that the original bolts were shaved off. Doesn't affect installation with the screw provided.
It isn't 100% flush on the sides since the diffuser is flat and the bumper curves in a little towards the muffler tips but with strong double-sided tape pulling the bumper out to the diffuser, it's hard to tell.
It isn't 100% flush on the sides since the diffuser is flat and the bumper curves in a little towards the muffler tips but with strong double-sided tape pulling the bumper out to the diffuser, it's hard to tell.
Last edited by AdvanZ33; Jul 16, 2012 at 02:11 AM.
Thread Starter
Joined: Jan 2009
Posts: 7,287
Likes: 189
From: Eastern NC
yea try it tonight at some different angles and shoot me some pics. i got a lil bit of extra travel $ right now, im unofficially back home now. (finished early)
Thread
Thread Starter
Forum
Replies
Last Post
Lt_Ballzacki
Brakes & Suspension
39
Aug 6, 2021 06:19 AM









