theking

iTrader: (3)

I have searched and haven't found any real concrete things on this. Is this something that Greddy is now including with the harness or are people puting in their own. The reason why I ask is I plan on doing my engine management for the Greddy TT with the TS flash for the bigger injectors and FI(mostly for timing) then using the Greddy to fine tune using map sensor. I am also puting in a J&S ultrasafeguard for good measure. I know that it will retard timing with boost but I want the e-manage to datalog since I'll have a wide band hooked to it. Thanks in advance.
Alan

Gman2004

iTrader: (8)

Here's an old thread about the diodes.

https://my350z.com/forum/showthread....ss+for+emanage

theking

iTrader: (3)

Thanks I spent over an hour looking for it. Thanks for your help.
Alan

Gman2004

iTrader: (8)

No problem. I searched for like 6 hours when I was getting my vortech installed with the emanage. The wiring diagram is on the last page. The links on the first page no longer work.

etx

I believe greddy was working on something. I'd call them and ask about it.

luanda

I had heard a rumour from a Greddy tuner that the problem was resolved with a software upgrade. I have been running the harnesson my Z for 8k - no probs.

theking

iTrader: (3)

Is this true? Anyone confirm?

002-M-P

iTrader: (12)

I would like to know as well, my timing harness and E-01 arrived yesterday and will be installed fairly soon.