I use some brake air duct [ flexable ] and run it down into the wheel well , and hook the air filter to it . I would like to see a tube made .

 

I *think* that he/we are referring to the pipe that goes between the Throttlebody and the Vortech tubing. Although I would like the tube you are referring to as well. I cannot begin to tell you the amount of time I have spent trying to get BOTH of these made....

Rob

 

we are talking about a pipe that goes from the blower to the filter, so you can relocate the filter to sit above the IC on the vortech.

 

You cant do that with the AT5 ..tranny lines in the way . You have to go into the wheel well . But for the MT6 , surprised no one has made one

 

If someone makes these pipes, they should put a fitting for a tube so you could run a hose/tube frome the bov to the inlet on the cai. Now you have a super quiet bov.

 

Bump for Tim and a volunteer.

 

We are ready whenever anyone can come down.

 

Bump #2 for Tim and a volunteer. There has to be someone in the San Diego area that can help out on this.

 

How far are you from Sac?

 

It would also be nice if we could get a pipe made to replace the collection of pipes and connnectors where the MAF is.

 

We are in San deigo.

 

Sorry teh ... sold mine

I don't actually know of any Vortech'd Zs in SD anymore. TwilightG35 has a Votech'd coupe ... but last I knew he was selling it.

Check the LA crowd .. there are a few up there that have it.