Right now i have the stock ecu and am running 5psi on a PE TT and a built motor. Would it be bad to turn it up for a couple of dyno pulls? I was thinking around 15psi or so. What do you think? Thanks

 

If you do not have engine management for 15psi then you are asking for trouble IMO. Reflash if I remember is only good up to around 9 lbs of boost.

 

Assuming you're actually serious... You need an ECU reflash to boost above 5 psi. You need larger injectors and stronger actuator arms to boost above 8-9psi.

--Steve

 

thanks for the help guys the only reason i was asking was somine was gonna pay for the dyno pulls if i did but i was thinking bout it and its deffently not worth it soo ill just pay for the dyno at 5psi. also zimbo i do have larger injectors and a stronger actuators but am just waiting for a new ecu (cant decide on which one to get) Thanks for the help though.

 

I'd recommend having Technosquare reflash your ECU for your larger injectors and estimated boost and then use something like the eManage Ultimate to dial things in perfectly.

--Steve