Which clutch for 600+whp
I am giving a strong vote for the ATS Triple Disc Carbon with 1350kg pressure plate. With a proper breakin and warmup procedure, they will easily hold 900whp+ (They are rated at 1500 crank hp). I am running the triple on mind at 622whp, and sticks like glue! 
No other clutches the market will hold 600-900ft/lbs of trq without a serious sacrifice in terms of drivability, pedal pressure, and smoothness. The ATS is the best of both worlds, IMHO.
No other clutches the market will hold 600-900ft/lbs of trq without a serious sacrifice in terms of drivability, pedal pressure, and smoothness. The ATS is the best of both worlds, IMHO.
Originally Posted by Sharif@Forged
I am giving a strong vote for the ATS Triple Disc Carbon with 1350kg pressure plate. With a proper breakin and warmup procedure, they will easily hold 900whp+ (They are rated at 1500 crank hp). I am running the triple on mind at 622whp, and sticks like glue!
No other clutches the market will hold 600-900ft/lbs of trq without a serious sacrifice in terms of drivability, pedal pressure, and smoothness. The ATS is the best of both worlds, IMHO.
No other clutches the market will hold 600-900ft/lbs of trq without a serious sacrifice in terms of drivability, pedal pressure, and smoothness. The ATS is the best of both worlds, IMHO.
M
Originally Posted by mraturbo
I have used many JWT clutches with 500+ WHP. I burned their single side racing clutch with close to 700 WHP on the dyno the other day, however, have since put their twin.
Originally Posted by Gman2004
tell me where I will be 4 of them. they list for $2,799 and Sharif sells them for just over $2,500.
Originally Posted by mistaboosta
hmm didnt know that JWT had a twin plate clutch kit. cant find it on their web page.
M
Thread
Thread Starter
Forum
Replies
Last Post
Colombo
Forced Induction
35
Nov 9, 2020 10:27 AM