*Blew My Motor*
#141
Originally Posted by EM-EFER
So you pulled the llogs from the utec and everything looked fine?
I feel sorry for you, hopfully you have enough money for a new engine. This is why I have Greddy kit sitting in the garage, I dont have enough money to fix the car if it blows.
I feel sorry for you, hopfully you have enough money for a new engine. This is why I have Greddy kit sitting in the garage, I dont have enough money to fix the car if it blows.
#142
Registered User
iTrader: (6)
Join Date: May 2005
Location: King of Materbation
Posts: 3,682
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Alberto
The UTEC doesnt datalog unless you tell it to, at the time the incident occured I wasnt datalogging. I can tell you Ive logged plenty though and my A/F was great and my timing conservative. Car ran great earlier in the day with no hiccups...
#144
Registered User
Join Date: Dec 2005
Location: Fullerton, CA
Posts: 902
Likes: 0
Received 0 Likes
on
0 Posts
My guess: You'll get a new block, build up the engine, have 600 hp and run 9's with those driving skills of yours. Sorry to hear about the engine blowing ... makes me think twice about purchasing F.I.
#146
Originally Posted by wtf no turbo
Well that block did outlast 3 transmissions. Hope you wont regret the single now after the build like me.GL
#148
Registered User
Join Date: Dec 2003
Location: Midland, TX
Posts: 1,602
Likes: 0
Received 0 Likes
on
0 Posts
Ill bet that it was that beast of a throttle body that I sold you that did it! LOL
Im sorry to hear about what happened but it will be cool to see what you can do with your new setup.
Im sorry to hear about what happened but it will be cool to see what you can do with your new setup.
#149
Originally Posted by BluZee
Ill bet that it was that beast of a throttle body that I sold you that did it! LOL
Im sorry to hear about what happened but it will be cool to see what you can do with your new setup.
Im sorry to hear about what happened but it will be cool to see what you can do with your new setup.
#150
Registered User
iTrader: (25)
Join Date: Aug 2004
Location: Goochland , VA
Posts: 4,402
Likes: 0
Received 0 Likes
on
0 Posts
Hey Alberto when your motor is back together make these dosent happen to you.
1- loose and missing intake bolts
2- loose and missing header bolts
3- loose radiator support bolts
4- loose torque converter bolts
5- missing bell housing bolts
1- loose and missing intake bolts
2- loose and missing header bolts
3- loose radiator support bolts
4- loose torque converter bolts
5- missing bell housing bolts
#151
Registered User
iTrader: (3)
Join Date: Apr 2005
Location: SO-CAL
Posts: 134
Likes: 0
Received 0 Likes
on
0 Posts
saw you pulling a red RX-7(one w/cf hood) on streetfire ...no doubt your car is quick if can pull an rex..(not sure how built that rex was though.....but it didn't sound too stock)........anyways g/l on your new motor.....
#152
New Member
iTrader: (4)
Join Date: Feb 2005
Location: Get out my way pimpin, VA
Posts: 22,913
Received 2,448 Likes
on
1,769 Posts
Sorry to hear man...
My thoughts are in the other thread.
My thoughts are in the other thread.
#154
New Member
iTrader: (41)
Originally Posted by znot
saw you pulling a red RX-7(one w/cf hood) on streetfire ...no doubt your car is quick if can pull an rex..(not sure how built that rex was though.....but it didn't sound too stock)........anyways g/l on your new motor.....
#157
the burninator
iTrader: (11)
I don't think TN caused Alberto's engine to fail, I think having a turbo in general did.
He could have owned a greddy or APS TT and it probably still would have failed. I think the TN kit itself is perfectly fine. Turbos in general generate a lot of peak torque really fast
Alberto, do you have an APS oil pan or are you using an oil pan spacer with your turbo?
He could have owned a greddy or APS TT and it probably still would have failed. I think the TN kit itself is perfectly fine. Turbos in general generate a lot of peak torque really fast
Alberto, do you have an APS oil pan or are you using an oil pan spacer with your turbo?
#158
Originally Posted by sentry65
Alberto, do you have an APS oil pan or are you using an oil pan spacer with your turbo?
Originally Posted by VN_350z
Alberto,
Can i buy a piece of your engine(the falling part) ? I just want to have piece of victorious car and a reminder not to go for TN.
Can i buy a piece of your engine(the falling part) ? I just want to have piece of victorious car and a reminder not to go for TN.
Originally Posted by thawk408
pretty sure he was FI.
#159
Originally Posted by rich150001
sorry to hear the badnews. I was watching your car closely as I know you actually drive your car hard and was hoping the VQ could take the abuse on stock internals. Maybe I will have to settle with a vortech instead although I was offered to have a 2 year/24k warranty offer on an f/i system with a good ems.