APS injectors size?
Registered User
Joined: Nov 2002
Posts: 1,038
Likes: 0
From: Winfield, IL
If I recall correctly I believe they are 440cc/min @ 3.0bar FP which would make them 515ish cc @ 3.5bar FP (it's not a linear relationship between flow rate and fuel pressure, but it's close, especially for minor changes like 3 to 3.5 bar FP).
Registered User
Joined: Sep 2006
Posts: 34
Likes: 0
From: Oklahoma
Originally Posted by al v
They are 440 cc , but at 4 bar or 58 lb ( fuel pressure in the aps fuel system ) they flow 500 cc.
440cc is correct, but at 4bar they are much more than 500cc. Maybe you mean 3.5 bar, stock Z fuel pressure.
Registered User
Joined: Aug 2006
Posts: 76
Likes: 0
From: santiago, chile
Originally Posted by Mike@DW
440cc is correct, but at 4bar they are much more than 500cc. Maybe you mean 3.5 bar, stock Z fuel pressure.
Here is a link to calculate the injector flow:
http://www.witchhunter.com/injectorcalc1.htm
Registered User
Joined: Nov 2002
Posts: 1,038
Likes: 0
From: Winfield, IL
Originally Posted by al v
They flow exactly 508 cc at 4 bar , and 481 cc at 3.5 bar.
Here is a link to calculate the injector flow:
http://www.witchhunter.com/injectorcalc1.htm
Here is a link to calculate the injector flow:
http://www.witchhunter.com/injectorcalc1.htm
Yeah he could use that website to calculate the flowrate... or he could use one of the injector flowbenches sitting in the fuel injector shop that he is the co-owner of hehe.
www.deatschwerks.com
Thread
Thread Starter
Forum
Replies
Last Post