found a leak i think

not sure what the tube is for the gold metal tube with a rubber hose connecting on the top right of this picture to it. when i move it in a certain direction i can hear the hissing stop.. would this hose cause a boost leak? what is this for anyways?
also there is a hose connector bulging in the middle at one of the connections between 2 of the TN pipes.. i spray some soapy water on it as best as i could and did not see any reaction.. is a bulge okay as long as it is not leaking?
The gold tube sticking out from the lower plenum? I believe for the TN, the vacuum line goes onto the upper plenum where the OEM black nipple is.
So if I remember correctly the lower plenum with the gold hose has a hose that connects to the head of the passenger side of the valve cover
Not sure if having a leak there would cause a boost leak.
So how much boost are you holding?
-Jonathan-
So if I remember correctly the lower plenum with the gold hose has a hose that connects to the head of the passenger side of the valve cover
Not sure if having a leak there would cause a boost leak.
So how much boost are you holding?
-Jonathan-
no boost gauge.. i think the car can still hit max boost with a small leak.. the turbo just has to work harder.. actually put out more psi.
the location of my hose is the same as the one in the picture.. which should be like stock. hose from lower plenum into the side of the head.. right by the ignition coil.
the location of my hose is the same as the one in the picture.. which should be like stock. hose from lower plenum into the side of the head.. right by the ignition coil.
That tube is running into the lower plenum and is vacuum or boost for something but I need to look at my car tonight to see what it is.... I don't think it should be open. And BTW the Turbonetics never has use do anything with that tube...
Originally Posted by MIAPLAYA
That tube is running into the lower plenum and is vacuum or boost for something but I need to look at my car tonight to see what it is.... I don't think it should be open. And BTW the Turbonetics never has use do anything with that tube...
Can't beleieve how cold it is today here on the east coast.. i try to work on my car today. after i got the first screw out my hand was already numb.. i think i'll hold off till Sunday. high close to 60.. today is like high in the mid 30;'s.. tonight 20 degreess.. eekk..
Thread
Thread Starter
Forum
Replies
Last Post
Lt_Ballzacki
Brakes & Suspension
39
Aug 6, 2021 06:19 AM
Colombo
Forced Induction
35
Nov 9, 2020 10:27 AM



