Greddy RS or HKS SSQV
#44
National Z Club
iTrader: (9)
Join Date: Nov 2005
Location: H Town
Posts: 1,178
Likes: 0
Received 0 Likes
on
0 Posts
I have a newer SSQV going on my build. When its done, ill try and get some clips up, altho im sure by then MaximumSportZ will have some sound/video up. The new ssqv's do look hot though!
#48
Registered User
iTrader: (25)
Join Date: Oct 2003
Location: Orlando, FL
Posts: 2,864
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by George@GTM
I don't know if I would have enough room with a oil cooler an PS cooler on the sides of the intercooler, not to mention I will be running the extreme kit. If not I would most likely copy your idea! :P
-George
GT Motorsports
-George
GT Motorsports
#51
Registered User
iTrader: (8)
Originally Posted by GQ 350z
If you go with the greddy setup, could you put the BOV's like that as well? Also, do you have to have a built block to run dual Bov's?
no need for a built block!... and the greddy's work great!!!
Last edited by QuadCam; 03-30-2007 at 12:32 PM.
#53
Registered User
iTrader: (25)
Join Date: Oct 2003
Location: Orlando, FL
Posts: 2,864
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by GQ 350z
Quad, SWEET setup. So what's the point of the dual's and that particular location? Is it much louder? Also, is it safer for the motor?
#54
Registered User
iTrader: (8)
Originally Posted by maximumsportZ
When you run two your not running it for sound but to prevent compressor surge, so the turbine doesn't spin backwards. Especially helpfull if your running alot of boost.
also, my drivability has improved. previuosly, I used to get some surging when driving around at low throttle angles. I think it may have had to do witht the close proximity of the BOV to the MAF on my pipes. Now, the car drives like " butta."
Last edited by QuadCam; 04-15-2007 at 07:01 AM.
#55
Registered User
iTrader: (12)
Join Date: May 2006
Location: Ft. Lauderdale, FL
Posts: 4,216
Likes: 0
Received 0 Likes
on
0 Posts
hey guys, i have an aps st and my bov is not impressive at all. matter of fact you can barely hear it over my exhaust note. i want to get the hks bov, is there anyhting else i will need to attach it? or does it come with everything needed? thanks
#56
Registered User
iTrader: (25)
Join Date: Oct 2003
Location: Orlando, FL
Posts: 2,864
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by azula
hey guys, i have an aps st and my bov is not impressive at all. matter of fact you can barely hear it over my exhaust note. i want to get the hks bov, is there anyhting else i will need to attach it? or does it come with everything needed? thanks
I got it here:
http://www.maxspeed-motorsports.com/ssqvadap.html
#57
New Member
iTrader: (4)
Join Date: Dec 2006
Location: ohio
Posts: 383
Likes: 0
Received 0 Likes
on
0 Posts
some of you guys have your bov's mounted in some weird locations, I have always read and this is how it is generally done on the z32's that you want the bov as close to the throttle body as possible.
#58
Registered User
Thread Starter
iTrader: (8)
Join Date: Jun 2003
Location: Cordova, TN
Posts: 563
Likes: 0
Received 0 Likes
on
0 Posts
does anyone have any good clips of the Type RS bov? The HKS has somewhat of a high pitched wistle at the end. Is the type RS like this, or is it more of a air release sound?
Thread
Thread Starter
Forum
Replies
Last Post
Lt_Ballzacki
Brakes & Suspension
39
08-06-2021 06:19 AM
ars88
Zs & Gs For Sale
18
04-04-2016 07:52 AM