<3 u chebby ***muah***

 

Awwwwww Im still on the wait list of mine

Enjoy, those things are the hotness!

 

yea. teh lose.

 

Hehehee! I can already see the photochops of you blowing that plenum changed to something else! Lol~ :-)

Isn't CF supposed to be shiny? Looks like it got dipped in acid. Hope it doesn't leak. Nice looking plenum anyway.

 

As some of you know i run a foundry here in redondo bch..Cosworth just stoped by with this part and i am going to send it to my pattern maker today for a retool...should be making them in about 2 months. ill see if i can get a group buy if anybody is interested

 

i forgot to update this

here is my dyno. b4 and after. i posted this up in the other section.

sorry i didnt have time to scan the pict. so i used my camera phone.. the graph before isnt the smoothest, tried to find one of the runs that was before (Black line.. back in may).. and the line in red was same boost level setting (i.e. didnt touch it) and slight retune after the plenum install (done back in july). all was using 91 pump gas. technosq reflash... this was done on technosquare's superflow dyno.. which is about 16% less than dynojet dynos...

you can see from the torque i gained alot in the midrange. and HP pulled all the way to redline..

after this we tuned up the boost even more and got some more power. but the tq and hp lines were similar..

 

Was it worth the $1300? or whatever you paid?

 

If you get the price down and get rid of the endcap leaks. Can you retool the endcaps in aluminum? That should help keep costs down.

 

Unless you are a hot chick then it ok

 

Are you talking about what happened to Luie's Cosworth? That was just a fluke. I have pushed mine over 19psi with out any problems....I know of other that have also.

 

Hopefully by next week I will have tested it @ 19psi also

 

Congrats on the built block Tyler4!!!

 

tyler4 saw your car on the dyno when i was in town picking some stuff from FORGED . sick numbers it was putting down man .

 

my shorts just got shorter after looking at your avatar picture


Can't wait to see the results!!!

 

correct.... luie created this aura that the cosworth manifold leaks...

i let mazzoo use mine on his twin turbo gt37r Z pushed beyind 20 psi and it did not leak

 

Ha! Thanks guys!

Blueper4mancez, that was probably WG pressure or low boost. My high boost #'s wont come until tommorrow or this weekend.

 

+1

 

cosmetic cf is shiny,structural cf is not(at least not for long)

 

Nice piece.

 

Congrats Tylor...dont forget to post pic's when you get her back. I am glad you went with the cosworth...it will really help with numbers.

When you get to FP... take a look at the inside of my car and tell me what you think....THE TRUTH TYLOR !!!