View Poll Results: Would you jump on it
I'd sell both cars for this



18
56.25%
I'd keep the Z and the Noble and be happy



11
34.38%
I'd not ask my350z



3
9.38%
Voters: 32. You may not vote on this poll
TT'd C6 Completey Built?
NOBLE IS A SICK CAR! easily dubbed the best handling car in the world! and it is quick as hell, 0-60 comes in 3.5 or less if i'm not mistaken. Why would you want to fiddle with a corvette TT that might have issues, when you can have something that fast out of the box.
Do it and then post vids.
<object width="425" height="344"><param name="movie" value="http://www.youtube.com/v/eHBAROPajWQ&hl=en&fs=1"></param><param name="allowFullScreen" value="true"></param><param name="allowscriptaccess" value="always"></param><embed src="http://www.youtube.com/v/eHBAROPajWQ&hl=en&fs=1" type="application/x-shockwave-flash" allowscriptaccess="always" allowfullscreen="true" width="425" height="344"></embed></object>
<object width="425" height="344"><param name="movie" value="http://www.youtube.com/v/eHBAROPajWQ&hl=en&fs=1"></param><param name="allowFullScreen" value="true"></param><param name="allowscriptaccess" value="always"></param><embed src="http://www.youtube.com/v/eHBAROPajWQ&hl=en&fs=1" type="application/x-shockwave-flash" allowscriptaccess="always" allowfullscreen="true" width="425" height="344"></embed></object>
The Noble if kept will be made non-street legal and purely for tracking. I'm thinking of selling my TT Z and going for this for a daily. As for the handling with the Noble no doubt the fastest track car I've ever driven other than a cart I had an opty to take out but it is uncomfortable as hell and there is no way I'd take it for a serious road trip... I'm wondering how the C6 handles a track compared to the lighter Z06? I had the opty to speak with one shop about how many "problems" they've dealt with and the scary part was he told me the platform is too new to really analyze reliability. If anybody knows somebody with a TT C6 please hit me up. I'm on the vette forum but people are pretty odd over there compared to here. Actually I think I'm being treated like a n00b over here asking how much HP a Z will take to beat a xxx
Thats what I'm saying, its an old man community over there. You ship your vette to the shop for mods, show it off a bit, drive it for a while and then ship it back to the shop for service. Sharing of info will be harder over there because fewer people will take a hands on interest in their vehicles IMO.
Engine:
709 RWHP @ 13.0 PSI (Current Tune)
Tested to 941 RWHP @ 21 PSI
Forged 427 LS7 Block with Darton Cylinder Sleeves and Diamond Pistons built to withstand 20+ PSI of Boost
Custom LS7 Oil System, 10 Quart Capacity and custom breather set-up
Turbo Technology C6 Z06 Custom Twin Turbo Set with fully coated custom piping by Embee Powder Coating
Fully C&C LS7 Cylinder Heads built by West Coast Racing Cylinder Heads
DeWitts Z06 Dual Density Radiator
East Coast Supercharging Bosch custom Fuel System with all Stainless Braided lines, and stainless AN Fittings.
*LS7 Hand C&C Intake Manifold and Throttle Body
*Textralia Twin Disk Clutch.
*RC 62 Lb Injectors
*ARE Self Oiling Valve Covers that spray cool oil directly onto the Rollers and Valves
*Custom ground Cam and Rollers by Comp Cam and George Scott (TTi)
709 RWHP @ 13.0 PSI (Current Tune)
Tested to 941 RWHP @ 21 PSI
Forged 427 LS7 Block with Darton Cylinder Sleeves and Diamond Pistons built to withstand 20+ PSI of Boost
Custom LS7 Oil System, 10 Quart Capacity and custom breather set-up
Turbo Technology C6 Z06 Custom Twin Turbo Set with fully coated custom piping by Embee Powder Coating
Fully C&C LS7 Cylinder Heads built by West Coast Racing Cylinder Heads
DeWitts Z06 Dual Density Radiator
East Coast Supercharging Bosch custom Fuel System with all Stainless Braided lines, and stainless AN Fittings.
*LS7 Hand C&C Intake Manifold and Throttle Body
*Textralia Twin Disk Clutch.
*RC 62 Lb Injectors
*ARE Self Oiling Valve Covers that spray cool oil directly onto the Rollers and Valves
*Custom ground Cam and Rollers by Comp Cam and George Scott (TTi)
I wonder what kind/size of turbos are being used. I'm guessing they must be relatively small turbos; definitely smaller than a GT35R. I suspect the turbos are too small for that LS7 displacement and are choking the top end power. You should ask to see a dyno sheet for this vette.
For comparison, the APS twin turbo kit for the C6 Z06 uses twin Garrett GT3582R turbos and put down 625whp at only approx 6.5PSI on a DD dyno. Based off that dyno sheet, I bet the APS kit would make over 800whp at 13PSI versus the vette you are considering.
http://www.airpowersystems.com/corvette/z06.htm
Last edited by RudeG_v2.0; Dec 3, 2008 at 08:03 AM.
update: i'm having trouble getting a hold of the guy as he travels as much as i do and i'm in vegas for the fight this weekend. i'm still on the fence about it and i'll update with pics if i get the ***** to do it. thanks for the feedback and PMs all.
I would probably replace the APS BOV's with Tial 50mm units instead and do ProEFI for the engine management. But I digress... I don't have the $$$ to fulfill this dream.
It sounds like a nice vette. But for the reasons I posted above, I have concerns about the turbo kit. If everything else with the car is legit and money wasn't an issue, I would get this vette and ditch the current turbo system for the APS kit.
I would probably replace the APS BOV's with Tial 50mm units instead and do ProEFI for the engine management. But I digress... I don't have the $$$ to fulfill this dream.
I would probably replace the APS BOV's with Tial 50mm units instead and do ProEFI for the engine management. But I digress... I don't have the $$$ to fulfill this dream.
Good luck with your decision either way.
I want instaspool and 700+ hp...
I actually entertained going with the APS Extremet twin turbo setup, but went with the Greddys as a nice balance between turbo lag and top end power. Nonetheless, I'm still making changes to reduce the turbo lag.
I actually entertained going with the APS Extremet twin turbo setup, but went with the Greddys as a nice balance between turbo lag and top end power. Nonetheless, I'm still making changes to reduce the turbo lag.
Sleeves are fine on these things.
TT 'Vettes are some interesting animals. They are extremely fast but not my style. Some people have problems and some don't. The S/C usually prove to be more reliable but make less power.
If it was up to me, I'd have done the LS7 engine build then hit it with a 250-300shot of nitrous. That way you can stay N/A when you want to go road racing.
TT 'Vettes are some interesting animals. They are extremely fast but not my style. Some people have problems and some don't. The S/C usually prove to be more reliable but make less power.
If it was up to me, I'd have done the LS7 engine build then hit it with a 250-300shot of nitrous. That way you can stay N/A when you want to go road racing.
Registered User
iTrader: (1)
Joined: Sep 2007
Posts: 5,256
Likes: 0
From: Texas, Arizona,Cayman Island



It looks like a sick car but I would stick with what you have and maybe throw a little money into further upgrading the Z and the Noble.