11PSI on stock APS TT BB???
#22
Banned
iTrader: (21)
Join Date: Dec 2003
Location: Florida
Posts: 4,472
Likes: 0
Received 0 Likes
on
0 Posts
When I put my APS TT kit on about 5 years ago I ran 8 psi with a 11.5 AFR. The unichip worked just fine, with no issues, for over a year and then I just upgraded to the UTEC. Probably wouldn't hurt to get it on a dyno and get a little tuning done.
#23
Registered User
iTrader: (1)
My AEM was saying 11.0 and I put it on a dyno and it bottomed out at 10, the lowest the dyno could read...LOL Most aftermarket widebands are inaccurate at the extreme ends of the spectrum. You are definately PIG rich...possible dangerously rich. I bet you gain 15-20whp just by getting your AFR in check.
Last edited by djamps; 08-17-2010 at 04:47 PM.
#24
Registered User
Thread Starter
Join Date: Jul 2010
Location: IntehG
Posts: 18
Likes: 0
Received 0 Likes
on
0 Posts
ok the problem is solved, and the tuner wanted it that low because he said thats the only way it would hold 11.8psi, but ended up the boost jet that comes in the kit was installed restricting flow to the wastegates, now its removed and im just over 8psi and running right at 11AFR at WOT
but im still going the get him to tune it with the Osiris hopefully this weekend
Thanks for all the help guys
but im still going the get him to tune it with the Osiris hopefully this weekend
Thanks for all the help guys
Thread
Thread Starter
Forum
Replies
Last Post
Tochigi_236
Feedback & Suggestions for Our Forum
8
09-27-2015 03:40 PM