Some new stuff from BP..pics inside
this is the one for 2" inlet
http://www.summitracing.com/parts/SUP-344-2005/
and the one for the 1.75" inlet
http://www.summitracing.com/parts/SUP-344-1705/
depends what the OD of your dumps are.
http://www.summitracing.com/parts/SUP-344-2005/
and the one for the 1.75" inlet
http://www.summitracing.com/parts/SUP-344-1705/
depends what the OD of your dumps are.
ross
they are just the "disk only mufflers"
with your twins i would think the 3" would be sufficient since your dumps are only seeing half the exhaust that a single would. If you can fit the 2" inlet with 4" disks that would be less restrictive for sure.
Some supra and evo guys use these things to help with noise.
WELD THEM ON THE PIPES....FYI
they do tend to fly off under boost
with your twins i would think the 3" would be sufficient since your dumps are only seeing half the exhaust that a single would. If you can fit the 2" inlet with 4" disks that would be less restrictive for sure.
Some supra and evo guys use these things to help with noise.
WELD THEM ON THE PIPES....FYI
they do tend to fly off under boost
Registered User
iTrader: (1)
Joined: Sep 2007
Posts: 5,256
Likes: 0
From: Texas, Arizona,Cayman Island
LMAO......I thought the same thing
Great job as always Sasha.....I Am always impressed when I see a great weld job....
I am leaving right now!!!!!
Great job as always Sasha.....I Am always impressed when I see a great weld job....
I am leaving right now!!!!!
Last edited by XKR; Sep 15, 2010 at 04:09 PM.
. The super trap would be a good option for the open dumps.
Registered User
iTrader: (1)
Joined: Sep 2007
Posts: 5,256
Likes: 0
From: Texas, Arizona,Cayman Island
Thread
Thread Starter
Forum
Replies
Last Post
Justin100
Intake Exhaust
26
Nov 29, 2015 03:58 PM
350Z Project X
Suspension
9
Oct 10, 2015 09:23 AM
