03 G35 FS: APS Extreme TT BUILLLLT by GTM Opinions...
Thread Starter
Registered User
iTrader: (1)
Joined: May 2007
Posts: 60
Likes: 0
From: Federal Way, WA
So heres the deal... There is a local guy that has an 03 OB G35 coupe 6MT. He has reciepts for over 37k worth of work done to the car at GTM in California. Car has 120k on it and build has 24k. Build includes built shortblock, pistons, sleeved, tranny upgrade, coilovers, APS extreme TT kit with upgraded dual Garrett turbos, you name it pretty much everything built! he had a very long list of upgrades.
Anyways he has had the car up on craigslist for awhile now and he cant get rid of it. he started at 25k then came down as far as 19k. This winter he put in an aftermarket alarm and remote start and ever since he did that the car wont start. says it turns over but wont fire. He says it is the NATS system and the car just needs to be brought to nissan for a security relearn (he put a dummy key under the dash to use for the remote start and thats what caused it to mess up the nats). I researched it and it does sound legit. My only worry is that this car has SOOOOOO much stuff done to it that what if it isnt the security relean, or if it is and I get it fixed and the car has a rod knock or somne other major problem with the motor....
Right now im pretty much getting the car for 14k if i do the deal... trading my running car for his car im gonna have to trailer out 2 hours to my place and go from there...
What are you opinions... could it really just be the NATS?
heres the pics...






Anyways he has had the car up on craigslist for awhile now and he cant get rid of it. he started at 25k then came down as far as 19k. This winter he put in an aftermarket alarm and remote start and ever since he did that the car wont start. says it turns over but wont fire. He says it is the NATS system and the car just needs to be brought to nissan for a security relearn (he put a dummy key under the dash to use for the remote start and thats what caused it to mess up the nats). I researched it and it does sound legit. My only worry is that this car has SOOOOOO much stuff done to it that what if it isnt the security relean, or if it is and I get it fixed and the car has a rod knock or somne other major problem with the motor....
Right now im pretty much getting the car for 14k if i do the deal... trading my running car for his car im gonna have to trailer out 2 hours to my place and go from there...
What are you opinions... could it really just be the NATS?
heres the pics...






Sleeves 
How do you upgrade the 6MT?
Did you call Sam @ GTM and ask him about the car? Ask the seller to fix the starting issue @ the local Nissan dealer or another VQ shop. IMO, unless you know the seller or the car very well, you MUST have a trusted independant shop look over the car prior to purchase - compression and leakdown required.
How do you upgrade the 6MT?
Did you call Sam @ GTM and ask him about the car? Ask the seller to fix the starting issue @ the local Nissan dealer or another VQ shop. IMO, unless you know the seller or the car very well, you MUST have a trusted independant shop look over the car prior to purchase - compression and leakdown required.
Say no to sleeves
+1 on Cass-what was built in the transmission?
Why is that car so fawking weak with that turbo kit?
I would have blocked out the old owners personal info.
Some may not agree with me, but if he made it so far on a sleeved block he hardly or never drove it hard. As soon as you do with that mileage on the motor consider it done, just MO.
+1 on Cass-what was built in the transmission?
Why is that car so fawking weak with that turbo kit?
I would have blocked out the old owners personal info.
Some may not agree with me, but if he made it so far on a sleeved block he hardly or never drove it hard. As soon as you do with that mileage on the motor consider it done, just MO.
Last edited by Alberto; Feb 28, 2011 at 09:46 AM.
The way I see it, you are buying a problem. This wont be your only vehicle right?
No matter how much he has in it, and how little it may seem to you that you are paying, you have to look at it that way. Plus you are trading a running car.
No chance in hell Id do it. For around $20K there are a ton of FI Z'G's in the marketplace that would have a better chance of providing you less of a hassle jumping into this world.
No matter how much he has in it, and how little it may seem to you that you are paying, you have to look at it that way. Plus you are trading a running car.
No chance in hell Id do it. For around $20K there are a ton of FI Z'G's in the marketplace that would have a better chance of providing you less of a hassle jumping into this world.
Thread Starter
Registered User
iTrader: (1)
Joined: May 2007
Posts: 60
Likes: 0
From: Federal Way, WA
yes its a 3rd car for me... and not 20k, trading my running car worth about 14k for it. but the guy has been sketch kinda all along, just like calling me bro and how much im gonna love this car when I hear the tripple bov go off and just wankster stuff hahah.
Trending Topics
Thread Starter
Registered User
iTrader: (1)
Joined: May 2007
Posts: 60
Likes: 0
From: Federal Way, WA
HERE IS HIS EXACT ADD
PAINT WAS DONE RIGHT COMPLETE DOORS LIGHTS REMOVED TRUNK HOOD EVERYTHING.. BUT CAN BE RE-TUNED UP TO 1020RWHP …car will do 205mph set at 518 hp..so u can imagine whats gona happen at over a thousand…. 9K .. The car IS Fully Built I have all the Receipts there is well over $100k, invested into this car INCLUDING THE CAR
The car was tuned at 15psi on 92octane and made 518whp & 523tq. Huge cast alloy high capacity engine oil pan with oil return ports 6 Quart
HKS High Volume Twin Vent Blow Off Valve
Infiniti G35 Supplementary Fitting
GTM CD007 Transmission New $2,400
OS GIKEN 6 SPEED CLOSE RATIO GEAR SET $4,000 1st: 2.783 2nd: 1.961 3rd: 1.507 4th: 1.217 5th: 1.000 6th: 0.812
K&N cone Filters
HKS SSQV Blow- Off Valve
Denso 880cc Injectors
Innovate LC-1 $400
HKS Fcon IS with wideband feedback for closed Loop operations Via Innovate $
Greddy EvoTT Ture duel Exhaust with 2.5’’ Flanges for the test pipes $2,600 Helix 2.5’’ Text pipes $450 ATS/carbon TWIN carbon clutch with 22lb flywheel $2500 NISMO stainless Steel clutch line $99
HKS Hipermax III One-piece Coilovers $2,295
Stillen Sway Bars Front and back $375
SPC toe bolts front and rear camber kit $900
SPL Rear Differential Solid Bushing $260
Cusco –A-Arms $395
Project Mu SCR-PRO 2 piece slotted & dimpled front rotors $750
StopTech Slotted Rear Rotors $550
Axxis Metal Matrix Pads $75
ARC Titanium Shift *** $190
Innovate Wideband Gauge $200
Defi Boost gauge $150
Greddy Profec Spec B Electronic Boost Controller and gauge $520
Real BRIDE cloth shift boot $100
Viper alarm system W/remote start and truck/door popper$814
Pioneer in-dash Screen W/DVD, Bluetooth (3200avhbt) $1100
Kuruma Z Front Bumper W/grill $818
Axis Halo Wheels 1,700
BRAND NEW week old KDW2 Street slicks 2 275/35/18 2 295/35/18 $1,300
—- 73,3926.24 in parts listed above..THEN ADD THE complete body custom paint and prep.. TOP SPEED 205…get some… Includes a plug-in replacement loom – no cutting and soldering! 360 296 5918
This car is Flawless and is truely one of a kind literally..i was told THERES ONLY A HANDFULL BUILT LIKE THIS IN THE WORLD…i know what i have so dont bother lowballin i have other cars 2 drive .ill put it back to 33 if it isnt sold my april and thats still a deal at 33k..its faster, lighter , has more hp and more torque than a ferrari modena… THATS 52K FOR THE MOTOR COMPLETE U DO THE MATH THIS CARS WORTH ALOT.. GTM stage 3 Cylinder Heads $4,600
Cleaning and inspecting cylinder head
Resurface cylinder head with an RA finish
Radius/5 angle valve job
Pressure testing cylinder head (cylinder head is disassembled completely)
New viton valve stem seals
New exhaust and intake valve guides (bronze)
Machine spring seat to accept single or dual valve springs
Ferrea 1.0mm oversize stainless steel valves
Install new valve seats
Ferrea dual titanium springs
Ferrea titanium retainers, locators, and keepers
Flow bench cylinder head
APS Extreme Twin Turbo Kit with Dual Upgraded BB GT3567R $14,000
Twin, state of the art, extreme efficiency, super compact, Garrett twin ball bearing turbochargers with a custom APS aerodynamic configuration
Massive APS DR Series Bar & Plate Front Mount Intercooler with unique cast alloy end tanks
Polished Stainless Steel and TIG welded intake and turbocharger discharge ducting
High Energy cast ductile iron and precision machined exhaust manifolds and turbine outlet housings. ____________________________________________________________ ____
Built and Tuned By GT Motorsports — Rancho Cuchamungo.CA JUNE 2009
STI wrx g35 srt-4 evo turbo jdm twin jdm gsr k20 integra dc2 dc5 civic b18 b20 b16 honda acura swap built civic vtec honda, acura, civic, c full size rx, si, hx, two door, integra, M3 M6 318 320 328 330 540 550 740 745 750 Ci si Lexus Xi Chevy ford suv trade dodge lt ls ltzSTI wrx g35 srt-4 evo turbo jdm twin jdm gsr k20 integra dc2 dc5 civic b18 b20 b16 honda acura swap built civic vtec honda, acura, civic, c full size rx, si, hx, two door, integra, M3 M6 318 320 328 330 540 550 740 745 750 Ci si Lexus Xi Chevy ford suv trade dodge lt ls ltz STI wrx g35 srt-4 evo turbo jdm twin jdm gsr k20 integra dc2 dc5 civic b18 b20 b16 honda acura swap built civic vtec honda, acura, civic, c full size rx, si, hx, two door, integra, M3 M6 318 320 328 330 540 550 740 745 750 Ci si Lexus Xi Chevy ford suv trade dodge lt ls ltz 360-296-5918 jay…no emails responses please i dont check them call or text anytime.. cash is 18500 and nothin lesss…or 25500 in trade…4×4 suv or 4×4 truck only
TRUELY ONE OF ONLY 10 IN THE US BUILT LIKE THIS..COMPETES WITH FERRARIS AND ASTONS…. this car was appraised 6 MONTHS ago at 42k..i like trucks and oldschools ,nice suvs and cash combos..prefferably on 22s 24s 26s 28s or bagged custom show truck..wil lconsider classic cars firebird chevelles id like a h2 or a nice tahoe or suburban
PIC IN TOP RIGHT CORNER IS A PIC OF THE RECEPT FOR THE MOTOR BUILD 38K..JUST THE ENGINE FAB ADD ANOTHER 14K FOR THE TURBOS !!!!!! FASTEST G35 IN WASHINGTON AND OREGON THERES 1 FASTER IN CALI BUT OTHER THAN THAT UR GETTIN A ROCKET.. APS custom mapped Plug-In engine management computer for optimum engine tune/power
APS High Output 880 Injectors with upgraded fuel supply. PARTS LIST:
FULL ENGINE FAB AND BUILD BY GT MOTORSPORTS IN CALIFORNIA — $37,485.24…YA FOR THE MOTOR BUILD
GTM stage 2 Sleeved shortblock $6900
Darton M.I.D. was 9gs.. Try n drive 1000hp on the street and ull understand why its turned down to 520hp
The car was painted 4 month ago OEM Obsidian Black. sleeves (including installation)
Arias Extreme pistons /GTM Extreme Duty Rods
GTM 4340 billet rods (with their alignment and resizing)
Rear main seal assembly
GTM Race bearings (standard bearings available)
ARP 8740 main studs
GTM Coatings on Pistons tops, Piston Skirts, and bearings. AND THE ENGINE CAN HANDLE IT EASY…
PAINT WAS DONE RIGHT COMPLETE DOORS LIGHTS REMOVED TRUNK HOOD EVERYTHING.. BUT CAN BE RE-TUNED UP TO 1020RWHP …car will do 205mph set at 518 hp..so u can imagine whats gona happen at over a thousand…. 9K .. The car IS Fully Built I have all the Receipts there is well over $100k, invested into this car INCLUDING THE CAR
The car was tuned at 15psi on 92octane and made 518whp & 523tq. Huge cast alloy high capacity engine oil pan with oil return ports 6 Quart
HKS High Volume Twin Vent Blow Off Valve
Infiniti G35 Supplementary Fitting
GTM CD007 Transmission New $2,400
OS GIKEN 6 SPEED CLOSE RATIO GEAR SET $4,000 1st: 2.783 2nd: 1.961 3rd: 1.507 4th: 1.217 5th: 1.000 6th: 0.812
K&N cone Filters
HKS SSQV Blow- Off Valve
Denso 880cc Injectors
Innovate LC-1 $400
HKS Fcon IS with wideband feedback for closed Loop operations Via Innovate $
Greddy EvoTT Ture duel Exhaust with 2.5’’ Flanges for the test pipes $2,600 Helix 2.5’’ Text pipes $450 ATS/carbon TWIN carbon clutch with 22lb flywheel $2500 NISMO stainless Steel clutch line $99
HKS Hipermax III One-piece Coilovers $2,295
Stillen Sway Bars Front and back $375
SPC toe bolts front and rear camber kit $900
SPL Rear Differential Solid Bushing $260
Cusco –A-Arms $395
Project Mu SCR-PRO 2 piece slotted & dimpled front rotors $750
StopTech Slotted Rear Rotors $550
Axxis Metal Matrix Pads $75
ARC Titanium Shift *** $190
Innovate Wideband Gauge $200
Defi Boost gauge $150
Greddy Profec Spec B Electronic Boost Controller and gauge $520
Real BRIDE cloth shift boot $100
Viper alarm system W/remote start and truck/door popper$814
Pioneer in-dash Screen W/DVD, Bluetooth (3200avhbt) $1100
Kuruma Z Front Bumper W/grill $818
Axis Halo Wheels 1,700
BRAND NEW week old KDW2 Street slicks 2 275/35/18 2 295/35/18 $1,300
—- 73,3926.24 in parts listed above..THEN ADD THE complete body custom paint and prep.. TOP SPEED 205…get some… Includes a plug-in replacement loom – no cutting and soldering! 360 296 5918
This car is Flawless and is truely one of a kind literally..i was told THERES ONLY A HANDFULL BUILT LIKE THIS IN THE WORLD…i know what i have so dont bother lowballin i have other cars 2 drive .ill put it back to 33 if it isnt sold my april and thats still a deal at 33k..its faster, lighter , has more hp and more torque than a ferrari modena… THATS 52K FOR THE MOTOR COMPLETE U DO THE MATH THIS CARS WORTH ALOT.. GTM stage 3 Cylinder Heads $4,600
Cleaning and inspecting cylinder head
Resurface cylinder head with an RA finish
Radius/5 angle valve job
Pressure testing cylinder head (cylinder head is disassembled completely)
New viton valve stem seals
New exhaust and intake valve guides (bronze)
Machine spring seat to accept single or dual valve springs
Ferrea 1.0mm oversize stainless steel valves
Install new valve seats
Ferrea dual titanium springs
Ferrea titanium retainers, locators, and keepers
Flow bench cylinder head
APS Extreme Twin Turbo Kit with Dual Upgraded BB GT3567R $14,000
Twin, state of the art, extreme efficiency, super compact, Garrett twin ball bearing turbochargers with a custom APS aerodynamic configuration
Massive APS DR Series Bar & Plate Front Mount Intercooler with unique cast alloy end tanks
Polished Stainless Steel and TIG welded intake and turbocharger discharge ducting
High Energy cast ductile iron and precision machined exhaust manifolds and turbine outlet housings. ____________________________________________________________ ____
Built and Tuned By GT Motorsports — Rancho Cuchamungo.CA JUNE 2009
STI wrx g35 srt-4 evo turbo jdm twin jdm gsr k20 integra dc2 dc5 civic b18 b20 b16 honda acura swap built civic vtec honda, acura, civic, c full size rx, si, hx, two door, integra, M3 M6 318 320 328 330 540 550 740 745 750 Ci si Lexus Xi Chevy ford suv trade dodge lt ls ltzSTI wrx g35 srt-4 evo turbo jdm twin jdm gsr k20 integra dc2 dc5 civic b18 b20 b16 honda acura swap built civic vtec honda, acura, civic, c full size rx, si, hx, two door, integra, M3 M6 318 320 328 330 540 550 740 745 750 Ci si Lexus Xi Chevy ford suv trade dodge lt ls ltz STI wrx g35 srt-4 evo turbo jdm twin jdm gsr k20 integra dc2 dc5 civic b18 b20 b16 honda acura swap built civic vtec honda, acura, civic, c full size rx, si, hx, two door, integra, M3 M6 318 320 328 330 540 550 740 745 750 Ci si Lexus Xi Chevy ford suv trade dodge lt ls ltz 360-296-5918 jay…no emails responses please i dont check them call or text anytime.. cash is 18500 and nothin lesss…or 25500 in trade…4×4 suv or 4×4 truck only
TRUELY ONE OF ONLY 10 IN THE US BUILT LIKE THIS..COMPETES WITH FERRARIS AND ASTONS…. this car was appraised 6 MONTHS ago at 42k..i like trucks and oldschools ,nice suvs and cash combos..prefferably on 22s 24s 26s 28s or bagged custom show truck..wil lconsider classic cars firebird chevelles id like a h2 or a nice tahoe or suburban
PIC IN TOP RIGHT CORNER IS A PIC OF THE RECEPT FOR THE MOTOR BUILD 38K..JUST THE ENGINE FAB ADD ANOTHER 14K FOR THE TURBOS !!!!!! FASTEST G35 IN WASHINGTON AND OREGON THERES 1 FASTER IN CALI BUT OTHER THAN THAT UR GETTIN A ROCKET.. APS custom mapped Plug-In engine management computer for optimum engine tune/power
APS High Output 880 Injectors with upgraded fuel supply. PARTS LIST:
FULL ENGINE FAB AND BUILD BY GT MOTORSPORTS IN CALIFORNIA — $37,485.24…YA FOR THE MOTOR BUILD
GTM stage 2 Sleeved shortblock $6900
Darton M.I.D. was 9gs.. Try n drive 1000hp on the street and ull understand why its turned down to 520hp
The car was painted 4 month ago OEM Obsidian Black. sleeves (including installation)
Arias Extreme pistons /GTM Extreme Duty Rods
GTM 4340 billet rods (with their alignment and resizing)
Rear main seal assembly
GTM Race bearings (standard bearings available)
ARP 8740 main studs
GTM Coatings on Pistons tops, Piston Skirts, and bearings. AND THE ENGINE CAN HANDLE IT EASY…
I love how people add 2 BOV's and make the cars laggier after shifts. If this guy has 3 BOV's dont walk away, run away.
Talking to Sam about the "truth" LOL @ considering that.
Of course he will say the build went well, and golden pistons were used, along with top machining so the sleeves wouldnt lift like a ***** skirt in a windstorm.
edit-LMAo @ that list and claims. I dont believe the transmission parts nor have I ever heard of them. It makes no sense to put in SHORTER gears on a car that would have issues hooking up. Either a d-bag seller making $Hit up, or he got his a$$ raped and gaped by GTM. Ignorance is bliss.
Talking to Sam about the "truth" LOL @ considering that.
Of course he will say the build went well, and golden pistons were used, along with top machining so the sleeves wouldnt lift like a ***** skirt in a windstorm.
edit-LMAo @ that list and claims. I dont believe the transmission parts nor have I ever heard of them. It makes no sense to put in SHORTER gears on a car that would have issues hooking up. Either a d-bag seller making $Hit up, or he got his a$$ raped and gaped by GTM. Ignorance is bliss.
Last edited by Alberto; Feb 28, 2011 at 10:01 AM.
Thread Starter
Registered User
iTrader: (1)
Joined: May 2007
Posts: 60
Likes: 0
From: Federal Way, WA
oh and he bought the car from the dude that had the work done i guess... he also told me the build has only 24k on it but after looking at the pic of the build it says 67k miles and the guy told me the car has 120k on it... hmmm
Thread Starter
Registered User
iTrader: (1)
Joined: May 2007
Posts: 60
Likes: 0
From: Federal Way, WA
I love how people add 2 BOV's and make the cars laggier after shifts. If this guy has 3 BOV's dont walk away, run away.
Talking to Sam about the "truth" LOL @ considering that.
Of course he will say the build went well, and golden pistons were used, along with top machining so the sleeves wouldnt lift like a ***** skirt in a windstorm.
edit-LMAo @ that list and claims. I dont believe the transmission parts nor have I ever heard of them. It makes no sense to put in SHORTER gears on a car that would have issues hooking up. Either a d-bag seller making $Hit up, or he got his a$$ raped and gaped by GTM. Ignorance is bliss.
Talking to Sam about the "truth" LOL @ considering that.
Of course he will say the build went well, and golden pistons were used, along with top machining so the sleeves wouldnt lift like a ***** skirt in a windstorm.
edit-LMAo @ that list and claims. I dont believe the transmission parts nor have I ever heard of them. It makes no sense to put in SHORTER gears on a car that would have issues hooking up. Either a d-bag seller making $Hit up, or he got his a$$ raped and gaped by GTM. Ignorance is bliss.
HOLYYYY **** i just watched the vid of your Z do 80-170... WOW man wowwww haha that **** is fast!
Thanks
That guy has so much BS in that thread, I dont have time to bold and HL all the crack in that ad.
KDW street slicks, appraised at $42K, claims of 1020hp and not being driveable so its 500whp is the funniest.
Needless to say I think its clear whats going on here.
That guy has so much BS in that thread, I dont have time to bold and HL all the crack in that ad.
KDW street slicks, appraised at $42K, claims of 1020hp and not being driveable so its 500whp is the funniest.
Needless to say I think its clear whats going on here.
if he did have all those parts, that would be a hell of a steal to part out. That tranny has been available for quite a while, but its meant for NA road racing in that it had a very low trq rating.
those heads are quite expensive as well.
Something is very wrong with the car for that price as its pretty much the top of the top for parts.
Pretty sure the FCON negates the NATS system as well ((every other standalone does) , so thats not the reason its not starting.
those heads are quite expensive as well.
Something is very wrong with the car for that price as its pretty much the top of the top for parts.
Pretty sure the FCON negates the NATS system as well ((every other standalone does) , so thats not the reason its not starting.
At 14k the owner (or you) could part the car out and make more money.







good eye!